TP-Link TD-W8970N Wireless Bridge, Form of MAC Address must be xxxxxxxxxxxx, like 00130A55FF09

TD-W8970NWireless N ADSL2+ Modem Router User Guide

¾Add: Click this button to add the MAC Address.

¾Remove: Select the item of the MAC Address and click this button to remove it.

When you click the Add button, the pop-up picture shown below, and then you can type the MAC Address in the MAC Address field.

)Note:

The form of MAC Address must be “xx:xx:xx:xx:xx:xx”, like “00:13:0A:55:FF:09”.

Figure 4-87

When you finished making changes to the MAC Filter List screen, click Save/Apply to save the changes.

4.5.4 Wireless Bridge

Choose “Wireless”Æ”Wireless Bridge”, you will see the screen of Wireless--Bridgesettings shown as below. You can configure wireless bridge features of the wireless LAN interface and click Apply/Save button to save the current configuration.

Figure 4-88

¾AP Mode: Select an AP Mode from the drop-down list. Options available are: Access Point and Wireless Bridge.

82