TD-W8970N 
Wireless N ADSL2+ Modem Router User Guide
¾Close: Click the button, the screen will be closed.
To Configure the System Log Settings:
Click the Configure System Log button (shown in Figure
Figure
¾Disable/Enable: Select the Enable to log the events, if you don’t want to log these events, please select Disable.
¾Log Level: Select the Log level in the
¾Display Level: Select the Display level in the
¾Mode: Select the mode to record the events. If the selected mode is Local, events will be recorded in the local memory. If the selected mode is Remote, events will be sent to the specified IP address and UDP port of the remote system log server. If the selected mode is Both, events will be sent to the local memory and the remote system log server.
¾Server IP Address: Type the address of the server you want to record the events.
¾Server UDP Port: Type the UDP Port of the server.
4.7.3 SNMP Agent
Choose “Management”Æ“SNMP Agent”, you can see the
SNMP (Simple Network Management Protocol) has been widely applied in the computer networks currently, which is used for ensuring the transmission of the management information between any two nodes. In this way, network administrators can easily search and modify the information on any node on the network. Meanwhile, they can locate faults promptly and implement the fault diagnosis, capacity planning and report generating.
An SNMP Agent is an application running on the Router that performs the operational role of receiving and processing SNMP messages, sending responses to the SNMP manager, and sending traps when an event occurs. So a Router contains SNMP "agent" software can be monitored and/or controlled by SNMP Manager using SNMP messages.
90
