TP-Link manual TD-W8970N Wireless N ADSL2+ Modem Router User Guide

TD-W8970NWireless N ADSL2+ Modem Router User Guide

)Note:

The Quick Setup Wizard will guide you to configure the WAN Service over ATM interface.

4.On the Wireless Configurations screen, we use the default SSID, select Network Authentication (take WPA-PSK/WPA2-PSKfor example), set a Pre-Shared Key, and then click Save to continue.

Figure 3-7

)Note:

All the existed ATM&WAN service will be cleared after clicking the Save button on this Quick Setup page.

5.You will see the Finish screen below, click Reboot to save these settings.

Figure 3-8

6.Now, your ADSL Modem Router has been configured and is rebooting. Please do not power

12