Zebra Technologies TTP 8000 Connecting the Power, None Idle 15 a, All black printing 10 a 12 a

20

Installation

Connecting to the Computer

Connecting the Power

Caution • Use only the recommended Zebra power supply (see Part Number List on page 124 for part number).

1.Attach a ground cable to the ground screw on the printer.

2.Connect the cable from the power supply to J8.

3.Connect the power cable to the line outlet.

4.Apply power to the printer.

If you use another type of power supply unit, connect the voltages according to the following illustration.

Important • The ground and the 24 V ground must be separated in the power supply to avoid ground loops!

At the printer end of the cable, use a Tyco Mate-N-Lok connector housing and two contact-sockets:

Figure 9 • Power Connection

Tyco No. 350777-1 Tyco No. 350689-1

Table 5 • Current Consumption at Factory Default Settings

Print Density	TTP 8200	TTP 8300
None (Idle)	0.15 A	0.15 A
10% coverage	1 A	2 A
20% coverage	2 A	3 A
30% coverage	3 A	4 A
40% coverage	4 A	5 A
50% coverage	5 A	6 A
All black printing	10 A	12 A

Note • Print speed, burn time, and temperature affects these values.

P1003638-003 TTP 8000 Technical Manual 10/19/2009