Zebra Technologies TTP 8000 manual Preprinting, 122, Be moved if you adjust the sensor position

122

Specifications

Paper Specification

Preprinting

General	To endure the heat developed during printing, the preprint must
	meet the requirements applicable for preprinting on paper
	intended for laser printing. OCR-blind ink must be used for
	preprint on the inner side of the roll.
	Ink used for preprinting on the thermal side must be non
	abrasive.
	The ink must not smear while wound up on the supply roll or
	during the printing process.
Print side	One side or both sides.
Print area	Printing is not allowed in the Black-Mark (1), Presenter (2), and
	After Cutter (3) sensor zones. Note that the black mark zone can
	be moved if you adjust the sensor position.

Note • Presenter sensors are fitted on printers with presenter, and after cutter sensor on Compact versions of the printer.

Figure 29 • Forbidden Print Zones

10mm wide

No-Printing zones

68 mm 82 mm

e

e

id

id

s

s

k

k

c

t

c

t

a

n

a

in

B

i

B

r

r

p

p

e

e

r

r

p

p

P1003638-003 TTP 8000 Technical Manual 10/19/2009