Zebra Technologies TTP 8000 manual Paper Handling, 107

			Specifications
			Paper Handling
Paper Handling
	Paper supply	Fan fold or roll paper
	Paper width	A4 (210.2 mm) or Letter Size (8.5”) selectable by moving paper
		guides.
	Printout length	297 mm (A4) 148.5-mm (A5) or 11” (Letter) 5.5” (Statement),
		or variable length 92* mm and up. There is no upper limit for
		printout length, but if the printout exceeds 4 m, the paper will be
		cut, then the printout will continue.
	Cutting	Guillotine cutter.
	Presenter operation**	Holds printout until printed then cuts and presents the complete
		printout. Extremely long printouts can be partially ejected to
		limit loop buildup.
	Pull detector	A pull detector detects when the customer pulls the paper and
		then starts motorized paper eject
	Eject length after cut	Default 50 mm. up to 255 mm extra feed can be added. The
		resolution is ±3 mm.
	Printout retraction***	Pulls back uncollected printouts and throws them in a
		wastebasket inside the kiosk.
	Paper loading	Load paper, press button to get automatic feed, cut, and eject.
		Automatic "on-line" after successful paper load.
	Sensors	Optical sensors: Out of paper, paper near end (optional) and
		weekend level sensor (optional). “Paper in presenter” and eject
		length sensors in presenter unit.
		Switch sensors: Cutter in home position, and printhead lifted.

*. The 01760-xxx, that is the vertical version of TTP 8000 has a minimum printout length of 200 mm.

**. Compact version of TTP 8000 does not have any presenter / pull detector.

***. Compact versions do not have retract function.

107

10/19/2009 TTP 8000 Technical Manual P1003638-003