Zebra Technologies TTP 8000 Selects normal or reversed print, Gives normal print, black on white

Programming

Text Commands

ESC T n1		Reversed/Inversed Text
1B 54 n1	Hex
27 84 n1	decimal
	Selects normal or reversed print.
	n = 0	Gives normal print, black on white
	n = 1	Gives reversed print, white on black

Single words, characters, or complete text lines can be reversed.

Note • Reverse text and underline swaps the background with the foreground. This means that the order in which the commands are issued affect the printout if one text overlaps another.

39

ESC u n1		Underline
1B 75 n1	hex
27 117 n1	decimal

Characters, single words, or complete text lines can be underlined.

n = 0

n = 1

n = 2

Turns OFF underline

Turns ON a 1 pixel wide underline

Turns ON a 2 pixel wide underline, etc. up to n=7.

ESC h n1		Text Height
1B 68 n1	hex
27 104 n1	decimal

Applicable n values are 0 — 15.

n = 1

n = 2

n = 0

Increases the character height to 2 times the basic character height.

Increases the character height to 3 times the basic character height etc.

Resets the character height to the basic character height.

In combination with variable character width (<ESC>w<n1>), give highly legible characters depending on the font to which the command has been applied.

Different fonts and heights can be mixed on the same print line.

10/19/2009 TTP 8000 Technical Manual P1003638-003