TP-Link manual TD-W8970N Wireless N ADSL2+ Modem Router User Guide

TD-W8970NWireless N ADSL2+ Modem Router User Guide

The Router's ports, where the cables are connected, and RESET button are located on the back panel.

Figure 1-2

¾LINE: Connect to the Modem Port of Splitter or to the telephone line.

¾1, 2, 3, 4 (LAN): The ports (1, 2, 3, 4) connect the Router to the local PC(s).

¾Reset: There are two ways to reset the Router's factory defaults.

1)Use the Restore Default function on Management ->settings ->Restore Default page in the router's Web-based Utility.

2)Use the Factory Default RESET button: With the Router powered on, use a pin to press and hold the RESET button for at least 5 seconds. And then release the button and wait the Router to reboot to its factory default settings.

¾POWER: The Power plug is where you will connect the power adapter.

¾ON/OFF: The switch for the power.

¾Wireless Antennas: To receive and transmit the wireless data.

5