TP-Link TD-W8970N manual MAC Filter

TD-W8970NWireless N ADSL2+ Modem Router User Guide

To configure Mixed WPA2/WPA-PSK settings, select the Mixed WPA2/WPA-PSK option from the drop-down list. The menu will change to offer the appropriate settings. The steps of this setting are the same with WPA-PSK.

Figure 4-85

4.5.3 MAC Filter

Choose “Wireless”Æ”MAC Filter”, you will see the screen of Wireless--MAC Filter settings shown as below.

Figure 4-86

Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting within your network’s RADIUS. To filter wireless users by MAC Address, either permitting or blocking access. If you do not wish to filter users by MAC Address, select Disabled.

¾Disabled: Select this option to disable MAC Filter function.

¾Allow: Select this option to enable MAC Filter function that allow wireless access by the devices listed on this screen.

¾Deny: Select this option to enable MAC Filter function that block wireless access from the devices listed on this screen.

81