Connecting to an External Source

The auxiliary input can be used to take advantage of the sound quality of your micro-component system when listening to other sources.

Examples: A television

A video disc player

A Hi-Fi stereo video cassette recorder

To connect to the external source, the source must have an audio output. In addition, you need an RCA connection cable.


1	Set the system to standby mode and disconnect it and the external
	source from the main socket.
2	Connect the audio cable to the rear of the micro-component system.
	Connect the...						To the connector marked...
	Red jack			...............................................			R (right)

	White jack				.............................................		L (left)

		For optimum sound quality, do not invert the right and left
		channels.
3	Plug the system back into the main socket and press Standby/On
4	(		) to switch it on.
	Select the AUX source by pressing AUX.
	Result: AUX is displayed.
5	Switch the external source on.
6	Adjust the volume and balance as required:
		Volume				Equaliser

Example: You can watch a film and take advantage of stereo sound provided that the original sound track is in stereo (as if you were in a cinema).

Speaker Connection

The loudspeaker connector terminals are located on the rear of the system (red and black tabs).

There are four terminals on the system:

Two for the left speaker (marked L)

Two for the right speaker (marked R)

To achieve the correct sound quality, connect the:

Red wire to the + terminals

Black wire to the - terminals

(Right Speaker)

(Left Speaker)

Directions in Installing Speaker

Installation in a place near heating apparatus, under direct lay of light or with high humidity may cause performance degradation of the speaker.

Do not install on the wall or on a high place of pole or other unsta- ble place to prevent any safety accident caused by falling of the speaker.

Do not take the speaker apart from TV or computer monitor. The speaker near the TV or computer monitor may influence the quality of the screen display.

Connecting the AM (MW) Aerial

The AM aerial (for long and medium waves) can be:

Placed on a stable surface

Fixed to the wall (you must first remove the base)

The AM aerial connector terminals are located on the rear of the system and are marked AM .

To avoid noise interference, check that the loudspeaker wires do not run close to the aerial wires.

Always keep them at least 2 inches (5 cm) away.

Connecting the FM Aerial

How to connect a COAXIAL TYPE aerial.

Connect a 75Ω antenna to the FM antenna terminal.

Plug the connector on the FM aerial supplied into the coaxial socket (75Ω) marked FM on the rear of the system.

Follow the instructions given on Page 14 to tune into a radio station, and determine the best position for the aerial.

If reception is poor, you may need to install an outdoor aerial.

To do so, connect an outdoor FM aerial to the FM socket on the rear of the system using a 75Ω coaxial cable (not supplied).

MM-T6 specifications

The Samsung MM-T6 is a cutting-edge multi-functional audio device that exemplifies the company’s commitment to innovation and quality in the audio technology space. Promising an immersive sound experience, it integrates advanced features tailored to meet the needs of modern consumers.

One of the standout features of the MM-T6 is its superior sound quality. Using Samsung's proprietary audio technology, it delivers crystal-clear sound with rich bass and balanced treble. This is complemented by the incorporation of adaptive sound technology, which optimizes audio output based on the content being played, whether it's music, movies, or gaming.

The design of the MM-T6 is modern and sleek, making it a perfect fit for contemporary home setups. Its compact size, coupled with a minimalist aesthetic, ensures that it can blend seamlessly into any environment without occupying too much space. The device is equipped with high-quality drivers that provide robust audio performance while maintaining an elegant look.

Connectivity is another highlight of the Samsung MM-T6. It supports a variety of input sources, including Bluetooth and Wi-Fi options, allowing users to stream music directly from their mobile devices or smart home systems. This wireless capability means users can enjoy high-quality audio without the clutter of cables. Additionally, the device is compatible with voice assistants, enabling hands-free control for an enhanced user experience.

Furthermore, the MM-T6 supports various audio formats, ensuring that it can handle a wide range of content. Whether it's high-definition audio or standard formats, the MM-T6 adapts effortlessly, providing listeners with an exceptional sound quality tailored to their preferences.

Another impressive characteristic of the MM-T6 is its energy efficiency. Designed to consume minimal power while delivering high performance, this device supports eco-friendly practices, making it an excellent choice for environmentally conscious consumers.

In conclusion, the Samsung MM-T6 is not just another audio device; it embodies a perfect blend of advanced sound technologies, aesthetic appeal, versatile connectivity options, and energy efficiency. It is designed to enhance any audio experience, whether at home or on the go, making it a worthwhile investment for anyone looking to elevate their sound quality.