11.5.2 Viewing the connection with home network
1Check that or is in HD source.
2Press MENU to enter the menu screen.
3Use 3or 4and 2to enter Information menu.
> The display shows: System,Wireless and Wired.
4Use 3or 4and 2to select Wireless or Wired.
• Wi-Fi: information about the Wi-Fi settings.
• Ethernet: information about the Ethernet settings.
11.6 Connect to Internet
Check that you have connected to an Access Point or Router with Internet access or connect
to an ADSL modem with internet access directly.
Set DNS and Gateway
If you are using a DHCP* enabled Access Point, Router or ADSL modem, the DNS and
Gateway can be obtained automatically, so you need only to set to Automatic
(DHCP):
1Press MENU.
2Use 3or 4and 2to select Settings followed by Network.
3Select Wired or Wireless.
4Use 3or 4and 2to select Automatic (DHCP).
*DHCP stands for Dynamic Host Configuration Protocol. It is a protocol for assigning dynamic IP
addresses to devices on a network.
Network settings 77
ENGLISH
Important! Make sure that no dial-up, user name or password is required for the Internet
access.