Prepare 31
ENGLISH
4.2.2 Remote control, 2-way
You can choose to use the 2-way remote control to operate either or . Depending on the
level of interference, you can also select your preferred operational mode: Enhanced Mode or
Normal Mode.
Center (default): to operate
Station: to operate
Enhanced Mode (default):This mode offers a better range (distance and angle). Use this mode if
there is no interference from a plasma TV nearby.
Normal Mode: Choose this mode if there is interference from a plasma TV nearby that is
distorting the display of the 2-way remote control.
1Press & hold REFRESH until the Select Device screen appears in the display of the 2-way
remote control.
2Use 3or 4to highlight and 2to select Center or Station.
3Use 3or 4to highlight and 2to select Normal Mode or Enhanced Mode.
4Confirm with OK.
Tip
• Avoid placing or near a plasma TV.The interference may distort the display on your 2-
way remote control.
• The status of or is synchronized into the display of the 2-way remote control, so it is
easier to operate the remote control.
• To synchronize the remote control display after activating the ybutton on the set, press
REFRESH on the remote control of Center.
Important! To save battery power, if no buttons are pressed for approx. 15 seconds, the 2-way
remote control enters idle mode. Press any button to reengage the control.