The following steps show how to get DNS and Gateway settings of the current
network from the PC connected to the same network:
1On your PC, click Start > Run
2Type cmd and click OK
3Type ipconfig/all
4Write down the DNS and Gateway of the current connection.
On
1Press MENU to enter the menu screen.
2Use 3or 4and 2to enter Settings followed by Network, then Wired.
3Press 2to continue.
Set DNS
1Enter the DNS server you wrote down.
2Press OK to confirm.
3Press OK to skip Set DNS2.
Tip
If necessary, follow Steps 1 and 2 above to set a secondary DNS server in Set DNS2.
Set Gateway
1Enter the Gateway you wrote down.
2Press OK to confirm.
Set proxy
1If you are using a proxy server to visit websites, enable Proxy and proceed with the proxy
setting as prompted, then press OK to confirm Otherwise, press OK to skip.
2Choose to apply the settings as prompted.
> Settings will change.
Connection to station could be lost appears.
Network settings
78