7As prompted, select Ye s to apply the settings.
is connected to the Wi-Fi home network.
might be disconnected from the Wi-Fi network of .
Tip
• To add to the network of , follow the steps under user manual section 3.1 Installation:
Install Center and Station .
• If you change the WEP/WPA key after you have added the WACS7500 into your home network,
the connection between the WACS7500 and your home network will be lost. In this case, please
restart WACS7500 and in order to refresh the IP update.
Applicable if you already have a wireless network (hub/switch/router).
11.2.2 Set network on Station ( )
1Press MENU to enter the menu screen.
2Use 3or 4and 2to enter Settings followed by Network, then Wireless.
3Press 2to continue.
> Display: Searching for Networks…
List of networks appears. (Network Not Found appears if no network is found.)
4Select the Wi-Fi network where your desired UPnP device is located.
5Press 2to continue.
Wireless
Router
www
Network settings 73
ENGLISH