Philips WAS7500/37

11.4 Connect to two different home networks

WACS7500 can be added into two different home networks via wired and wireless network ports.

Note that the IP addresses of the two different network ports cannot be in one subnet:WACS7500

has no router function and cannot determine which port to use.

Note

Once is added to the Wi-Fi network, all Wi-Fi ad-hoc connections with the WAC7500 will be

shut down.

Applicable if you have two home networks.

Once a is added to the Wi-Fi (wireless) home network, the Wi-Fi wireless connection of this

particular to the will be shut down. However may still maintain its Wi-Fi ad-hoc

connection with one or more other .

WACS7500 cannot shadow the IP of a network device that is not activated. Please be careful of the

IP address settings to avoid IP address conﬂict between the wired and Wi-Fi ports.

11.5 View connection status

11.5.1 View Station ( ) status in Wi-Fi network of Center ( )

1Check that is in HD source.

2Press MENU to enter the menu screen.

3Use 3or 4and 2to enter Station Management (Mgnt) menu.

4Use 3or 4and 2to select Station Status.

> A list of connected or previously connected is displayed on the .

5Press 2to view the connection information.

Network settings