18.1.3 Preparation
Try the necessary rear connections and the Wi-Fi connections between AND in order to
find a suitable location for installation/mounting (see 3 Installation).
18.1.4 Mounting Station
You can mount Station to the wall using the provided bracket.
1Align the bracket in the chosen location on a wall. Use a pencil to mark the drilling positions.
2Drill the holes as marked.
3Fix the bracket to the wall using suitable screws (not provided) and wall anchors (not provided)
for all the holes provided in the wall mounting bracket.
4Use a screwdriver and fasten the supplied screws to as shown.
5Hook / mount in place as shown.
Important!
To avoid the risk of injury and damage to property as well as to the product:
• Check for supply lines (gas, water, electricity, etc.) before drilling holes.
• Assess the type of screws necessary to bear Station.
• Choose the right drill and bit for the type of wall to drill the holes.
• Take all other precautions to be observed when carrying out this type of mounting/installation
job.
Appendix
96