14.2 Restore previous firmware
After the firmware of is upgraded, you can restore it to its previous version as desired.
On
1Press MENU to enter the menu screen.
2Use 3or 4and 2to enter Settings followed by Firmware, then Restore firmware.
3Press 2to select Ye s .
After upgrading or restoring the firmware of , you need to reestablish the Wi-Fi connection
between and .
14.3 Re-establish Wi-Fi network of Center ( ) and Stations ( )
On :
1Press MENU to enter the menu screen.
2Use 3or 4and 2to enter Station Mgnt menu.
3Use 3or 4and 2to select Add New Station.
> Searching for Stations starts.
On :
1Disconnect the power plug of and then connect them to the power supply again.
>Connecting to Center appears.
2Press MENU on the remote control to enter the selection screen of Installation Mode and
Select Server.
3Use 3or 4and 2to enter Installation Mode.
> Stations start to connect to .
4Press STOP 9on when all are found.
Reset 85
ENGLISH