Krell Industries KPS 25sc manual Connecting the KPS25sc to YourSystem,continued, Power On

Connecting the KPS25sc to YourSystem,continued

INPUTANDOUTPUTCONNECTIONS,continued

7.Connectthe KPS25sc to ACpower: plug the ACpowerinto the IEC connector (50) on the back panel, then plug and AC powercord into the wall socket.

IMPORTANT

When switching between active sources, alwayslower the volumeto off or mutethe out- put. This ensures that the next source played does not damageyour system with a high out- put transient.

POWER ON

Powerthe KPS25sc on using the back panel powerswitch (48), Theword KRELLmomentarily appearsin the front panelmenudisplay (26).This indicates that the KPS25schasinitialized. The KPS25sc is in the stand-by mode. The red stand-byLED(12) illuminates.

FACTORYDEFAULTSETTINGS

Krell ships the KPS25scwith the following out- putsoperational:

Variable outputs: RCAsingle-ended and XLRbalanced

Fixed outputs: RCAsingle-ended and XLRbalanced

Variable outputs: Krell CAST4-pin bayonet

IMPORTANT

Whenthe KPS25sc is connecteddirectly to a stereo power amplifier or a pair of monaural poweramplifiers, use the variable output termi- nals to ensure proper level control Using the fixed outputs in this configuration could damage poweramplifiers and loudspeakers.

The cover operation modeis shipped set for auto. Thecover must be downfor compactdisc playbackto begin.

Theshutter operation modeis shipped set for auto. The cover automatically becomesopaque when you play a compact disc and becomes clear whenplaybackstops.

Krell KPS25sc 23