Krell Industries KPS 25sc manual Tape Input and Output

Tape Input and Output

The KPS25sc has a discrete tape input and output. Thetape output is usedto sendan in put signal fromS-1, S-2, S-3, or B-1 to a recording device or processor. Youcan use the tape fea- ture in two ways:

1.Usethe tape input to comparethe output signal of a three-headanalogtape recorder to the output signal of an audio source, whenmakinga recording. To activate this function, select an audio sourcefor record- ing using either the S-1, S-2, S-3, or B-1 input selector buttons (20-23) or keys. Press the tape button (24) or tape key the Tabletop RemoteControl to switch betweenthe tape recorder output (red LED illuminated) andthe input source(red LED not illuminated).

2.Usethe tape output to create a processor loop, whenthe KPS25sc is connectedto a

graphic equalizer or other ancillary equip- ment.To activate this function, connectthe equipment to the KPS25sc tape outputs

(33)as described in the equipmentmanu- facturer's manual. Press the tape button

(24)or tape key on the Tabletop Remote Control to switch between the processor output (red LEDilluminated) and the input source(red LEDnot illuminated).

Note

Whenchanging sources, lower the volume to off or mutethe output. This ensuresthat the next source played does not damageyour sys- temwith a high output transient.

Krell KPS25sc 25