BackPanel, continued
SeeFigure4 on page14
Digital Inputs andOutputs
43 Optics1 and Optics2 Outputs
TheKPS25sc is equippedwith two EIAJ fiber optic digital outputswith TosLinkconnectors.
44 Coax1 and Coax2 Outputs
The KPS25sc is equipped with two S/PDIF coaxial digital outputs with RCAconnectors.
45 AESOutput and Input
TheKPS25sc is equippedwith one AESdigital output andinput with XLRconnectors.
46 Optics1 and Optics2 Inputs
TheKPS25sc is equippedwith two EIAJ fiber optic digital inputs with TosLinkconnectors.
47 Coax1 and Coax2 Inputs
The KPS25sc is equipped with two S/PDIF coaxial digital inputs with RCAconnectors.
Power
48 Back Panel Power Switch
Usethe backpanel powerswitch for the initial KPS25sc poweron. For more information, see
Connecting the KPS25sc to Your System,
on page22.
49 Line Fuse
The50/60 Hz line fuse protects the KPS25sc againstshort circuits fromthe external ACpower.
Note
Replacefuses only with the fuse value speci- fied on the back panel
50 IEC Connector
Theconnectoris for use with the provided IEC standard 15 ampACpower cord.
Back Panel RemoteConnections
51 Krell Link Out
52 Krell Link In
The KPS25sc is equipped with a Krell Link communicationsoutput and input data port. Krell Link allows synchronized remote power on andoff of other componentswith Krell Link, such as Full Power Balanced amplifiers or MasterReferenceAmplifiers.
53
The KPS25sc is equipped with an
54 12 VDCOut
The KPS25sc is equippedwith an output that sends12 VDCpoweron/off (12 V trigger) sig- nals to other Krel components and other devices that incorporate a 12 V trigger. This allows you to turn other componentson or off, or to and from
Notes
The 12 VDCoutput poweris limited to 30 ma.
Consultthe owner'sreference of the components usedin a custominstallation to take full advan- tage of the remotecapability of the KPS25sc.
16 | Krell KPS25sc |
