SMC Networks SMC6724AL2 manual Features and Benefits, Connectivity, Expandability, Performance

Page 25

FEATURES AND BENEFITS

Features and Benefits

Connectivity

◆24 dual-speed ports for 10 or 100 Mbps Ethernet connections

◆Auto-negotiation enables each RJ-45 port to automatically select the optimum communication mode (half or full duplex) if this feature is supported by the attached device; otherwise the port can be configured manually

◆Independent RJ-45 ports with support for automatic MDI/MDI-X

◆Unshielded (UTP) cable supported on all RJ-45 ports: Category 3 or better for 10 Mbps connections and Category 5 or better for 100 Mbps connections

◆IEEE 802.3 Ethernet and 802.3u Fast Ethernet compliance ensures compatibility with standards-based hubs, network cards and switches from any vendor

Expandability

◆Optional single-port 1000BASE-T Gigabit module

◆Optional single-port 100BASE-FX multimode and single-mode modules

◆Optional single-port 1000BASE-X GBIC module that supports a single-port 1000BASE-SX, 1000BASE-LX, or 1000BASE-ZX GBIC transceiver.

Performance

◆Transparent bridging

◆Aggregate bandwidth up to 8.8 Gbps

◆Switching Table with 8K MAC address entries

1-9

Page 24 Page 26
Image 25
Page 24 Page 26
Contents TigerSwitch 10/100 Page TigerSwitch 10/100 Installation Guide Trademarks Limited Warranty SMC Networks, Inc Tesla Irvine, CA FCC Class a CompliancesIndustry Canada Class a EC Conformance Declaration Class a Compliances Warnhinweis Faseroptikanschlüsse Optische Sicherheit Safety ComplianceUnderwriters Laboratories Compliance Statement Wichtige Sicherheitshinweise Germany Viii Table of Contents Making Network Connections Appendices Xii Overview Chapter About Tigerswitch 10/100Management Options Switch ArchitectureRJ-45 Ports Description of HardwareLED Status LEDsSystem Status LEDs Optional 10/100/1000BASE-T Module SMC6824GT Optional Media Extender ModulesOptional 100BASE-FX Module SMC6824FSSC Optional 1000BASE-X Gbic Module SMC6824GB Optional 100BASE-FX Module SMC6824FMSCPower Supply Receptacle Power Supply ReceptacleConnectivity Features and BenefitsExpandability PerformanceManagement Chapter Network Planning Introduction to SwitchingCollapsed Backbone Application ExamplesNetwork Aggregation Plan Network Aggregation PlanRemote Connection with Fiber Cable Remote Connection with Fiber CableMaking Vlan Connections Making Vlan ConnectionsApplication Notes Selecting a Site Installing the SwitchRJ-45 Connections Ethernet CablingPackage Contents Equipment ChecklistOptional Rack-Mounting Equipment Rack Mounting MountingAttaching the Brackets Attaching the Adhesive Feet Desktop or Shelf MountingInstalling an Optional Module Installing an Optional Module into the SwitchPower Receptacle Connecting to a Power SourceWiring Map for Serial Cable Connecting to the Console PortSerial Cable Wiring Installing the Switch Chapter Making Network Connections Connecting Network DevicesTwisted-Pair Devices Cabling GuidelinesMaking Twisted-Pair Connections Connecting to PCs, Servers, Hubs and SwitchesWiring Closet Connections Fiber Optic Devices Wiring Closet ConnectionsMaking SC Port Connections 1000BASE-T Cable Requirements Connectivity Rules10/100 Mbps Ethernet Collision Domain Mbps Gigabit Ethernet Collision DomainCable Labeling and Connection Records Diagnosing Switch Indicators Appendix a TroubleshootingInstallation Power and Cooling ProblemsIn-Band Access Appendix B Cables Specifications10BASE-T/100BASE-TX Pin Assignments Twisted-Pair Cable and Pin AssignmentsFigure B-2. Straight-through Wiring Straight-Through Wiring1000BASE-T Pin Assignments Crossover WiringCable Testing for Existing Category 5 Cable Fiber Standards Adjusting Existing Category 5 CablingDB-9 Port Pin Assignments Console Port Pin AssignmentsConsole Port to 9-Pin DTE Port on PC Console Port to 25-Pin DTE Port on PC Physical Characteristics Appendix C SpecificationsBase Unit Switch Features Standards Management FeaturesSafety WarrantyCompliances CE Mark Emissions100BASE-FX Extender Modules Slide-in Modules1000BASE-T Extender Module 1000BASE-X Gbic Module Appendix D Ordering Information Ordering Information 1000BASE-T GlossaryAuto-Negotiation BandwidthCollision Domain Fast Ethernet SwitchEnd Station EthernetIeee 802.3ab IeeeIeee 802.3u Ieee 802.3zRJ-45 Connector Media Access Control MACSwitched Ports Network DiameterNumerics IndexIndex-2 Index-3 Index-4 Page For Technical SUPPORT, Call

SMC6724AL2 specifications

The SMC Networks SMC6724AL2 is a high-performance Layer 2 managed switch that has been designed to cater to the needs of growing networks. It offers robust features, reliability, and advanced technologies that make it suitable for small to medium enterprises and advanced network infrastructures.

One of the standout features of the SMC6724AL2 is its 24 Ethernet ports, which provide excellent connectivity options. These ports support 10/100/1000 Mbps speeds, ensuring that devices can communicate efficiently without bottlenecks. Additionally, the switch incorporates four SFP (Small Form-factors Pluggable) slots that offer flexibility for fiber optic connections, enabling long-distance data transmission and further enhancing the network's scalability.

The switch supports advanced Layer 2 features such as VLAN (Virtual Local Area Network), which allows for logical segmentation of networks, improving security and managing broadcast traffic. The powerful traffic management capabilities include Quality of Service (QoS), which prioritizes critical applications and ensures optimal performance for voice and video traffic.

To enhance network reliability, the SMC6724AL2 comes equipped with features such as Link Aggregation Control Protocol (LACP), which combines multiple physical ports into a single logical link to increase the available bandwidth and provide redundancy. The switch also supports Spanning Tree Protocol (STP) and Rapid Spanning Tree Protocol (RSTP), which help to prevent network loops and ensure reliable data transfer.

User-friendly management options are another hallmark of the SMC6724AL2. It offers support for Simple Network Management Protocol (SNMP), enabling administrators to monitor network status and performance effectively. The device can also be configured through a web-based interface, allowing for easy setup and management without the need for complex command-line operations.

In terms of security, the SMC6724AL2 provides features such as port security and access control lists (ACLs) to safeguard against unauthorized access and ensure data integrity. Its robust hardware comes with a metal chassis designed for durability, making it suitable for various environments.

In summary, the SMC Networks SMC6724AL2 is a versatile and powerful managed switch that meets the demands of modern networking, offering advanced features and technologies that ensure reliability, performance, and security for enterprises looking to optimize their network infrastructure.
Top Page Image Contents