CONFIGURATION AND MANAGEMENT
| Status LEDs | |
|
|
|
LEDs | Functions | |
|
|
|
Power | Indicates that the switch is receiving power. | |
|
|
|
RPU | Indicates that the optional Redundant Power | |
| Unit is supplying power to the switch. | |
|
|
|
Status | Indicates that the LED array is displaying status | |
| information for each port (This is the default | |
| display mode). |
|
|
|
|
| Tx/Rx (60%) | Indicates that the port is |
|
| transmitting or receiving |
|
| data. (Blinking) |
|
|
|
LED | 100Mbps (30%) | Indicates that the port is set |
Array |
| to operate at 100 Mbps. |
|
| (Unlit = 10 Mbps) |
|
|
|
| Indicates that the port is set | |
|
| to operate in |
|
| mode. (Unlit = |
|
|
|
| Select/Link (1%) | Indicates a valid network |
|
| connection. |
|
|
|
Forward % | Indicates that the LED array is displaying the | |
| percentage of all packets forwarded by each | |
| port to another port. | |
|
|
|
Utilization % | Indicates that the LED array is displaying the | |
| percentage of LAN bandwidth being utilized | |
| by each port. |
|
|
|
|
Collision % | Indicates that the LED array is displaying the | |
| percentage of packets in collision relative to the | |
| total number packets transmitted by each port. | |
|
|
|
Full/Half | Indicates that the transmission mode for each | |
| port may be manually set to full- or | |
|
|
|
Diagnostic | Indicates that the unit is running internal | |
| diagnostic tests. |
|
|
|
|