Silicon Power Computer & comm 74669003 manual Irix Performance Tuning, Jumbo Frames and Irix

Page 33

Chapter 4

Performance Tuning

This chapter discusses performance tuning topics for IRIX and SGI ProPack for Linux.

For good TCP performance, the socket buffers used by applications must be at least as large as the bandwidth-round trip delay product between the two endpoints. Normally, larger socket buffers are called for with 10–Gbit Ethernet than when lower-bandwidth network interface cards are used.

IRIX Performance Tuning

This section discusses the following:

•"Jumbo Frames and IRIX" on page 17

•"Read/Write Size and IRIX" on page 18

•"Socket Buffer Size and IRIX" on page 18

•"Multibuffer Mode and IRIX" on page 18

There is no one tuning configuration that is best for all environments. This section gives guidelines for the following cases:

•A point-to-point configuration, in which IRIX is transmitting to or receiving from

IRIX

•A multiclient configuration, in which an IRIX system is connected via 10-Gbit Ethernet to a switch that fans out to multiple clients via 1-Gbit Ethernet

Jumbo Frames and IRIX

In general, an MTU of 9000 bytes (known as jumbo frames) gives the best TCP throughput performance and scaling results. Avoid an MTU of 1500 bytes if possible.

007–4669–003

17

Page 32 Page 34
Image 33
Page 32 Page 34
Contents SGI 10-Gigabit Ethernet Network Adapter User’s Guide Contributors TUV Page New Features Page Version Description Record of RevisionPage Contents Glossary Index About this Guide AudienceImportant Information Related Publications Scope of this GuideConventions Obtaining PublicationsUser input Reader Comments Product SupportSGI Chapter Cabling FeaturesTools Configuration LimitsPage Connecting the Adapter to a Network Connecting the Adapter to a Network 2Release 2 Card Fibre Optic Connections Page Using LEDs to Determine Functionality Operating the AdapterVerifying Functionality Link Verifying Adapter RecognitionLinux Adapter Recognition Verification Enabling the Adapter Verifying that the Adapter is Properly Configured and EnabledLinux Adapter Configuration Verification Resetting the Adapter Configuration MTU Size Settings Irix Configuration Linux ConfigurationOutput should look similar to the following Page Performance Tuning Irix Performance TuningJumbo Frames and Irix Multibuffer Mode and Irix Read/Write Size and IrixSocket Buffer Size and Irix Socket Read and Write Buffer Sizes for SGI ProPack SGI ProPack Performance TuningJumbo Frames and SGI ProPack Read/Write Size and SGI ProPackPerformance Tuning CD-ROM CD GlossaryTCP/IP Index Index Xgcmd diagnostic tool
Top Page Image Contents