Specifications |
Optional Features
Run User Program
Run User Program will run user applications compiled specifically for the HitchTM. One major use of this feature is to execute the application necessary to update the firmware on your HitchTM unit. After installing the user program according to instructions on page 28, you must run the program and reboot to
1.Go to the Settings menu and press the SELECT button to advance to the Main menu.
2.Turn the scroll wheel clockwise to select Run User Program.
3.Press the SELECT button. The files loaded during the Install User File step will be displayed.
4.Highlight the file you want to run and press the SELECT button to begin the file transfer.
5.The application selected will begin to execute.
6.In the case of a firmware update, the AC power jack MUST be connected in order for the update application to proceed. DO NOT disconnect the USB drive or the AC power during the update process.
The screen will display a Copy files progress bar followed by a Checking files screen and an Updating files screen.
Page 22