Figure 1.2
The screen in Figure 1.2 shows you the information that is currently set on the AP. The default SSID is "WLAN", the default IP address is 192.168.2.50 and the default gateway is 192.168.2.1. This is very important information to note when configuring your wireless network so that it is integrated properly with your existing network. For instance, if your existing LAN is operating on a 10.0.0.1 IP scheme, then you should change the IP address of the Access Point to 10.0.0.x (where x is not equal to 1 and is less than 255). To change these configuration settings, simply click the [Setup] button.