SMC Networks SMC2655W warranty Fixed IP - see Static IP

Page 33

DSL - DSL stands for Digital Subscriber Line. A DSL modem uses your existing phone lines to transmit data at high speeds.

Ethernet - A standard for computer networks. Ethernet networks are connected by special cables and hubs, and move data around at up to 10 million bits per second (Mbps).

ESS - ESS (ESS-ID, SSID) stands for "Extended Service Set". More than one BSS is configured to become an Extended Service Set. LAN mobile users can roam between different BSSs in an ESS (ESS-ID, SSID).

Fast Ethernet NIC - Network interface card that is in compliance with the IEEE 802.3u standard. This card functions at the media access control (MAC) layer, using carrier sense multiple access with collision detection (CSMA/CD).

Fixed IP – (see Static IP)

Full-Duplex - Transmitting and receiving data simultaneously. In pure digital networks, this is achieved with two pairs of wires. In analog networks, or digital networks using carriers, it is achieved by dividing the bandwidth of the line into two frequencies, one for sending, one for receiving.

Hub - Central connection device for shared media in a star topology. It may add nothing to the transmission (passive hub) or may contain electronics that regenerate signals to boost strength as well as monitor activity (active/intelligent hub). Hubs may be added to bus topologies; for example, a hub can turn an Ethernet network into a star topology to improve troubleshooting.

IP Address - IP stands for Internet Protocol. An IP address consists of a series of four numbers separated by periods, that identifies an single, unique Internet computer host. Example: 192.34.45.8.

ISP - Internet Service Provider. An ISP is a business that provides connectivity to the Internet for individuals and other businesses or organizations.

LAN - A communications network that serves users within a confined geographical area. It is made up of servers, workstations, a network operating system and a communications link. Servers are high-speed machines that hold programs and data shared by network users. The workstations (clients) are the users' personal computers, which perform stand-alone processing and access the network servers as required.

Diskless and floppy-only workstations are sometimes used, which retrieve all software and data from the server. Increasingly, "thin client" network computers (NCs) and Windows terminals are also used. A printer can be attached locally to a workstation or to a server and be shared by network users. Small LANs can allow certain workstations to function as a server, allowing users access to data on another user's machine. These peer-to-peer networks are often simpler to install and manage, but dedicated servers provide better performance and can handle higher transaction volume. Multiple servers are used in large networks.

The message transfer is managed by a transport protocol such as TCP/IP and NetBEUI. The physical transmission of data is performed by the access method (Ethernet, Token Ring, etc.), which is implemented in the network adapters that are plugged into the machines. The actual communications path is the cable (twisted pair, coax, optical fiber) that interconnects each network adapter.

MAC Address - MAC (Media Access Control) A MAC address is the hardware address of a device connected to a network.

MDI / MDI-X - Medium Dependent Interface - Also called an "uplink port," it is a port on a network hub or

Image 33
Contents NEXT - Warranty Statement BACK - Intro Limited WarrantyCopyright TrademarksBACK - Warranty Statement Equipment ChecklistNEXT - Install Instructions ∙ ∙ ∙ ∙BACK - Equipment Checklist SMC2655W Installation InstructionsBACK - Install Instructions Utility Installation Windows 98/NT/Me/2000/XPPage Step 6 The wizard will finalize the installation Page BACK - Utility Installation Utility Configuration Application-basedPage Page Page Page Page Page Default Value SettingMAC Access Control PasswordBACK - Application-based Configuration Utility Configuration Web-basedPage Page Page Page Page BACK - Web-based Configuration Firmware Update ProcedureThe status bar will show the level of completion Restore to Factory Defaults Procedure BACK - Firmware Update Procedure Troubleshooting / FAQsWhat is a Wireless LAN? What is AD-HOC?What is Tx Rate? What is Infrastructure?What is RTS Threshold? What is Authentication Algorithm?Wireless Data Rates Technical SpecificationsRadio Signal Type Media Access ProtocolRF Output Power Wireless AP Maximum Distance TableLED Indicators Power VoltageEnvironmental SMC 802.11b Wireless AP Maximum Distance TableSpeed and Distance Ranges ConditionBACK - Frequently Asked Questions GlossaryFixed IP - see Static IP Page BACK - Glossary Featured ProductsPage Page Page BACK - Featured Products Technical SupportFOR TECHNICAL SUPPORT, CALL INTERNET