SMC Networks SMCWAA-B Available Network Status Settings Explanation, Disabled default, Enabled

asterisk *) will be changed.

6.Press the Scroll Up/Down buttons until the desired network setting is selected. Press the Select button to edit the setting. Note: for settings that require text input, this triggers Edit Mode.

7.Make the changes required to the setting and press the Select button.

IMPORTANT: When you have finished making changes to Network Setup settings, you must explicitly save the settings in order for them to take effect. If you use the Cancel button during this process, all changes will be lost.

8.Press the Scroll Down button until Save is displayed. Press the Select button to display “Save Settings?” (or you may also be prompted to press the Store button to save and exit).9. Press the Select button to save the changes (or press the Cancel button to abandon changes).

10. The Wireless Audio Adapter will then restart and use the new settings.

Available Network Status Settings

Setting	Explanation
Device Name	Name of the Wireless Audio Adapter device.
	Example: My SMCWAA-B
Version	Current version of the Wireless Audio Adapter
	software in use.
SSID	SSID (Service Set Identifier) assigned to the Wireless
	Audio Adapter by your wireless network. The SSID
	must contain between 2 and 32 alphanumeric, case-
	sensitive characters.
Network Type	Wireless network type. Options:
	Infrastructure If the network uses an Internet
	Access Point
	Ad-HocIf the network uses a peer-to-peer
	connection and no Internet Access Point.
WEP	Indicates whether or not Wired Equivalent Privacy
	(WEP) encryption is enabled on the wireless network.
	Options:
	Disabled (default)
	Enabled.
Key Entry Method	Options:
	ASCII (default) Key is entered as text (this is not the
	same as a passphrase however).

27