SMC Networks SMC7500A/VCP manual If You Cannot Connect to the Internet, Port And Cable Assignments

Page 27

IF YOU CANNOT CONNECT TO THE INTERNET

If You Cannot Connect to the Internet

•Check that your computer is properly configured for TCP/IP. See “Configuring the TCP/IP Protocols” on page 11.

•Make sure the correct network adapter driver is installed for your operating system. If necessary, try reinstalling the driver.

•Check that the network adapter’s speed or duplex mode has not been configured manually. Note that it is recommended to set the adapter to auto-negotiation when installing the network driver.

Port And Cable Assignments

Caution: Do not plug a phone jack connector into any RJ-45 port. Use only twisted-pair cable with RJ-45 connectors that conform with FCC standards.

An Ethernet twisted-pair link segment requires two pairs of wires. Each wire pair is identified by two different colors. Each wire pair must be attached to the RJ-45 connector in the orientation detailed below.

The RJ-45 Ethernet port on the TigerAccess Extended Ethernet CPE is an MDI port, which means you must use a cross-over cable when connecting to like devices (MDI to MDI). For connection to hubs or switches that have MDI-X ports, a straight-through cable must be used. In straight-through cable, pins 1, 2, 3, and 6 at one end of the cable are

15

Page 26 Page 28
Image 27
Page 26 Page 28
Contents TigerAccess Extended Ethernet CPE Page TigerAccess Extended Ethernet CPE User Guide Copyright Limited Warranty Limited Warranty FCC Class B CompliancesEC Conformance Declaration Class B Wichtige Sicherheitshinweise Germany Safety ComplianceCompliances Table of Contents Viii Introduction Tigeraccess Extended Ethernet CPETigeraccess Extended Ethernet CPE ISP Vdsl TechnologyRate Mode Max. Range Features and BenefitsPackage Checklist System Requirements Hardware Description TigerAccess Extended Ethernet CPELED LED StatusInstallation OverviewMounting Cable Connections Configuring the TCP/IP Protocols Powering OnWindows 95/98/NT WindowsWindows XP Mac OS Diagnosing CPE Indicators TroubleshootingPort And Cable Assignments If You Cannot Connect to the InternetPin MDI-X Signal MDI Signal Name Straight-Through CableStraight-Through RJ-45 Pin Assignments Crossover Cable RJ-11 PortsCrossover RJ-45 Pin Assignments Pin Signal Name Wire Color Vdsl Specifications Physical CharacteristicsFunctional Criteria Compliances Standards ConformancePage For Technical SUPPORT, Call

SMC7500A/VCP specifications

The SMC Networks SMC7500A/VCP is a versatile and powerful hardware device that caters to a variety of networking needs. Designed primarily for small to medium-sized businesses, it stands out due to its combination of efficiency, reliability, and advanced features.

One of the key features of the SMC7500A/VCP is its high-performance routing capabilities. It supports various WAN technologies, making it suitable for diverse network environments. The device provides integrated support for Ethernet over DSL, cable, and fiber connections, allowing seamless integration with existing infrastructure. This flexibility helps organizations optimize their connectivity and makes it easier to scale as demand grows.

In terms of security, the SMC7500A/VCP is equipped with advanced firewall features and Virtual Private Network (VPN) support. The built-in firewall protects the network from unauthorized access and potential threats, while the VPN capabilities enable secure remote access for employees working from various locations. This is particularly important in today’s increasingly mobile workforce, where robust security protocols are essential for protecting sensitive company data.

Management and monitoring are made straightforward with the SMC7500A/VCP due to its user-friendly web interface. Network administrators can easily configure settings, monitor performance, and diagnose issues from a central point of control. This ergonomic design simplifies management tasks and enhances operational efficiency.

Moreover, the SMC7500A/VCP supports Quality of Service (QoS) protocols, allowing for traffic prioritization. This is crucial for applications requiring stable connectivity, such as VoIP and video conferencing, ensuring that bandwidth is allocated effectively to maintain the quality of service.

Another notable characteristic of the SMC7500A/VCP is its support for IPv6, the next-generation internet protocol. This prepares organizations for future growth and ensures compatibility with modern devices and networks.

In summary, the SMC Networks SMC7500A/VCP is an excellent choice for businesses seeking a feature-rich and reliable networking solution. With its high-performance routing, robust security measures, easy management, and support for advanced technologies, it positions itself as a valuable asset for organizations aiming for enhanced connectivity and streamlined operations. Its versatility and advanced capabilities make it a strong contender in the competitive networking equipment market.
Top Page Image Contents