SMC Networks SMC2804WBR V.2 manual Point-to-Point Tunneling Protocol Pptp

Page 52

Configuring the Wireless Barricade™ g Router

Point-to-Point Tunneling Protocol (PPTP)

Point-to-Point Tunneling Protocol (PPTP) can be used to join different physical networks using the Internet as an intermediary. Using the above screen allows client PCs to establish a normal PPTP session and provides hassle-free configuration of the PPTP client on each client PC.

Enter the PPTP Account, Password, Host Name, and then Service IP Address (usually supplied by your ISP), the assigned IP address, and subnet mask.

Leave the Maximum Transmission Unit (MTU) at the default value (1460) unless you have a particular reason to change it.

Enter a maximum Idle Time Out (in minutes) to define a maximum period of time for which the PPTP connection is maintained during inactivity. If the connection is inactive for longer than the Maximum Idle Time, it will be dropped. (Default: 0 minutes.)

Note: Please be aware that the setting of [Maximum Idle Time] to "0" and/or [Auto-Reconnect] enabled can cause an increase of your telephone bill if you don't have signed a flatrate.

50

Image 52

Contents Page Page Table of Contents Table of Contents Why should you do that? Important InformationLED Indicators About the Wireless Barricade g RouterFeatures and Benefits Features and BenefitsInstalling the Wireless Barricade G Router Package ContentsInstalling the Wireless Barricade g Router Hardware DescriptionHardware Description Front and Rear PanelsSystem Requirements Connect the SystemBasic Installation Procedure Connect the SystemAttach to Your Network Using Ethernet Cabling Making the LAN ConnectionsAttach to Your Network Using Radio Signals Making the WAN Connection Connecting the Power Adapter Installing TCP/IP Windows 95/98/MeConfiguring Client TCP/IP WindowsInstalling TCP/IP Setting Up TCP/IP Configuring Your Computer in Windows 95/98/MeSetting Up TCP/IP Obtain IP Settings from Your Wireless Barricade g Router Configuring Your Computer in Windows NT Configuring Client TCP/IP Configuring Your Computer in Windows Configuring Your Computer in Windows XP Configuring a Macintosh Computer Manual IP Configuration for all Windows OS Setting Up TCP/IP Verifying Your TCP/IP Connection Configuring the Wireless Barricade G Router Browser ConfigurationConfiguring the Wireless Barricade g Router Disable Proxy ConnectionInternet Explorer 5 or above For Windows Internet Explorer For MacintoshNavigating the Web Browser Interface Navigating the Web Browser InterfaceMaking Configuration Changes Setup Wizard Setup WizardTime Zone Broadband Type Cable Modem Fixed-IP xDSLPPPoE xDSL Point-to-Point Tunneling Protocol Pptp Advanced Setup BigPondAdvanced Setup DdnsSystem Time ZonePassword Settings Remote Management ZoneAlarm Pro with Web Filtering Setup Configuring the Wireless Barricade g Router Advanced Setup Configuring the Wireless Barricade g Router Syslog Server WAN Dynamic IPPoint-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP Address BigPond DNS LAN Wireless Channel and SsidConfiguring the Wireless Barricade g Router Security WPA Encryption Type WEP Encryption Type Configuring the Wireless Barricade g Router NAT Network Address Translation Address MappingVirtual Server Special Applications Trigger Public Port Public Type Comment Access Control FirewallMAC Filtering Table URL Blocking Schedule Rule Advanced Setup Discard Ping from WAN Default Enable Mail Alert ConfigurationDMZ Demilitarized Zone Ddns Dynamic DNS Settings Ddns Service Provider Web Site UPnP Universal Plug and Play Setting Tools Configuration Tools ToolsTools Firmware Upgrade Tools Reset Status Section DescriptionTroubleshooting Verify your connection to the Wireless BarricadeAm getting an IP Address that starts with TroubleshootingHave another IP Address displayed 10/100 LED does not light after a connection is made Advanced Features StandardsWAN Interface LAN InterfacesSpecifications Safety CompliancesFederal Communication Commission Interference Statement FCC Radiation Exposure StatementCompliances EC Conformance Declaration Class BSafety Compliance Industry Canada Class BAustralia AS/NZS 3548 1995 Class B Underwriters Laboratories Compliance StatementWichtige Sicherheitshinweise Germany SMCs Limited Warranty Statement Legal Information ContactsFull Installation Manual Firmware and Drivers Contact SMC Legal Information and ContactsCopyright Statement of Conditions Limitation of LiabilityTrademarks Model Number SMC2804WBR