SMC Networks SMC7004ABR V.2 manual Configuring Your Computer in Windows Dhcp IP Configuration

Configuring Client TCP/IP

Configuring Your Computer in Windows 2000

DHCP IP Configuration

1.Access your Network settings by clicking Start, then choose Settings and then select Control Panel.

2.In the Control Panel, locate and double-click the Network and Dial-up Connections icon.

3.Locate and double-click the Local Area Connection icon for the Ethernet adapter that is connected to the Barricade™ Router. When the Status dialog box window opens, click the Properties button.

4.In the Local Area Connection Properties box, verify that the box next to

Internet Protocol (TCP/IP) is checked. Then highlight the Internet Protocol (TCP/IP), and click the Properties button.

5.Select “Obtain an IP address automatically” to configure your computer for DHCP. Click the OK button to save this change and close the Properties window.

6.Click the OK button again to save these new changes.

7.Reboot your PC.

Obtain IP Settings From Your Barricade™ Router

See “Obtain IP Settings From Your Barricade™ Router” on page 21.

24