SMC Networks SMC7004VBR Getting to Know the Barricade, LED OFF Flashing Power, Wan, Link/Act

Page 5

7004VBR – Manual

CHAPTER 2 Getting to Know the Barricade

The SMC7004VBR Barricade Cable/DSL Broadband Router is the perfect solution for the home/office environment. This full-featured router offers:

∙4 - 10/100 Mbps Auto-Sensing LAN ports with Auto-MDI MDIX feature

∙1 - 10/100 Mbps WAN port with Auto-MDI MDIX feature

∙Comprehensive LEDs for network status and troubleshooting

∙Reset Button

2.1 LED Indicators

The Barricade includes LED indicators on the front panel that simplify installation and network troubleshooting.

LED	ON	OFF	FLASHING
POWER	Receiving power	Not receiving power	N/A
WAN	Good WAN connection	No WAN connection	Transmitting or receiving
	detected	detected	traffic
LINK/ACT	Good LAN connection	No LAN connection	Transmitting or receiving
	detected	detected	traffic
10/100 Mbps	LAN port operating at	LAN port operating at 10	N/A
	100 Mbps	Mbps

Resetting the Barricade

The Reset button is located on the rear panel of the Barricade Broadband Router. Use a paper clip or a pencil tip to push the Reset button.

Reset

If the Router is having problems connecting to the Internet, simply unplug the router for 3 seconds then plug back in.

Restore Factory Defaults

If resetting the router does not resolve your issue, then you can follow these steps:

1.Leave power plugged into the router

2.Locate the reset button on the back panel, press and hold until WAN LED flashes off.

3.Release reset button.

5

Image 5

Contents Cable/DSL Broadband Router Trademarks CopyrightConfiguring the Barricade Configuring your ComputerSetup Wizard Advanced Setup Setting up the Print Server IntroductionPackage Contents Features and BenefitsIntroduction Minimum RequirementsGetting to Know the Barricade LED OFF Flashing PowerWAN LINK/ACTPower on Basic Installation ProcedureGetting Connected Connect the LANConfiguring Windows 95/98/Me Configuring your ComputerConfiguring Windows Configuring a Macintosh Computer Configuring Windows XPBrowser Configuration Configuring the BarricadeDisable Proxy Connection Internet Explorer 5 or aboveAccessing the Barricade Management Making Configuration Changes Navigating the Web-based AdministrationStep One Time Zone Setup WizardStep Two Broadband Type ∙ Cable Modem∙ PPPoE Step Three Finish Configuration∙ Pptp ∙ BigPond∙ Time Zone System∙ Remote Management ∙ Password Settings∙ Dynamic IP WAN∙ Pptp ∙ Static IP Address LAN ∙ DNS∙ LAN IP ∙ IP Address Pool∙ Virtual Server NAT∙ Parental Control ∙ Special ApplicationsFirewall 7004VBR Manual ∙ MAC Filtering ∙ Website Blocking ∙ Advanced Settings Ddns Dynamic DNS ∙ DMZ Demilitarized Zone∙ Firmware Upgrade ∙ Reboot ∙ Configuration Tools o BackupUPnP ToolsInformation InternetGateway Verify you are connected to the Barricade Router Appendix a TroubleshootingAm getting an IP Address that starts with Have another IP Address displayed7004VBR Manual Have a Dynamic IP connection and I can’t get online NAT Appendix B Technical SpecificationsAppendix C Warranty FCC Interference Statement Appendix D CompliancesCE Declaration of Conformity Industry Canada Class BPhone Appendix E Technical SupportMail addresses For Technical SUPPORT, Call