INSTALLATION
You should also remember to turn off the power, remove the power cord from the outlet, and keep your hands dry when you install the Barricade.
Basic Installation Procedure
1.Connect the LAN: You can connect the Barricade to your PC, or to a hub or switch. Run Ethernet cable from one of the LAN ports on the front of the Barricade to your computer’s network adapter or to another network device.
2.Connect the WAN: Prepare an Ethernet cable for connecting the Barricade to a Cable/xDSL modem or Ethernet router. Prepare a serial cable for connecting the Barricade to an ISDN TA or PSTN modem.
3.Connect your printer: Use standard parallel printer cable to connect your printer to the printer port on the Barricade.
4.Power on: Connect the power adapter to the Barricade.
Internet
Internet Access
Device SMC7004ABR
Broadband Router
SOHO Office or Residence