Hum and Noise
Attenuation
Audio Distortion
Spurious
Suppression
Output Transistor Protection
Output Power Stabilization
:45 dB
:Less than 5% with 3 kHz deviation with 1000 Hz modulat-
ing frequency
:
:
:
RECEIVER
Sensitivity
Threshold Squelch
Sensitivity
Tight Squelch
Sensitivity
Spurious Response
Attenuation
Image Response
Attenuation
Intermodulation
Attenuation
Adjacent Channel
Rejection
Selectivity
Audio Output
Power
Power Requirement:
IF Frequencies
Hum and Noise Level
:
:0.20 J.1V(E lA method)
:2 J.1V(E lA method)
:75 dB
:75 dB
:70 dB @ 0.3 J.1Vdesired
50 dB @ 30 J.1Vdesired
35 dB @ 300 J.1Vdesired
:70 dB (EIA method)
::17.5 kHz @ 6 dB down :115 kHz @60 dB down
:3.5 watts minimum at 10% distortion at 1 kHz modulation and :13.5 kHz deviation (4 ohm speaker)
0.6A @ 13.8V DC, squelched
1.2A @ 13.8V DCat rated audio output
:
: