SMC Networks SMC2804WBR38 manual Am getting an IP Address that starts with

Page 77

Troubleshooting

If you have an IP address that starts with 169.254.XXX.XXX then see the next section.

If you have another IP address configured, then see section C.

B. I am getting an IP Address that starts with 169.254.XXX.XXX

If you are getting this IP Address, then you need to check that you are properly connected to the Router.

Confirm that you have a good link light on the Router for the port this computer is connected to. If not, please try another cable.

If you have a good link light, please open up a DOS window as described in the previous section and type ipconfig/renew.

If you are still unable to get an IP Address from the Router, reinstall your network adapter. Please refer to your adapter manual for information on how to do this.

C. I have another IP Address displayed

If you have another IP address listed then the PC may not be configured for a DHCP connection. Please refer to “Configuring Client TCP/IP” on page 12 for information.

Once you have confirmed your computer is configured for DHCP, then please follow the steps below.

1.Open a DOS window as described above.

2.Type ipconfig/release.

67

Image 77

Contents C 2 8 0 4 W B R Page Page Copyright FCC RF Radiation Exposure Statement FCC Class BLine ±1kV, AC/DC Line to Earth ±2kV EC Conformance Declaration Class BIndustry Canada Class B Safety ComplianceAustralia AS/NZS 3548 1995 Class B Underwriters Laboratories Compliance StatementWichtige Sicherheitshinweise Germany Table of Contents Table of Contents LED Indicators About the Wireless Barricade G RouterFeatures and Benefits Package Contents Installing the Wireless Barricade G RouterHardware Description Hardware Description System Requirements Connect the System Basic Installation ProcedurePower on Connect the power adapter to the Router Connect the System Making the Wlan Connections Making the WAN Connection Connecting the Power Adapter Attach the Wireless Barricade g Router to the InternetWindows 95/98/ME Installing TCP/IPWindows Installing TCP/IPConfiguring Client TCP/IP Configuring Your Computer in Windows 95/98/Me Setting Up TCP/IPConfiguring Client TCP/IP Obtain IP Settings from Your Wireless Barricade g Router Configuring Your Computer in Windows NT Setting Up TCP/IP Configuring Your Computer in Windows Configuring Your Computer in Windows XP Configuring a Macintosh Computer Manual IP Configuration Verifying Your TCP/IP Connection Pinging 192.168.2.1 with 32 bytes of data Request timed out Browser Configuration Configuring the Wireless Barricade G RouterInternet Explorer For Macintosh Disable Proxy ConnectionInternet Explorer 5 or above Netscape 4 or above Navigating the Web Browser Interface Making Configuration ChangesTime Zone Setup WizardCable Modem Broadband TypePPPoE Fixed-IP xDSLMenu Description Advanced SetupTime Zone SystemPassword Settings WAN Dynamic IP Point-to-Point Over Ethernet PPPoE Point-to-Point Tunneling Protocol Pptp Static IP Address DNS LAN Channel and Ssid WirelessEncryption Advanced Setup Configuring the Wireless Barricade g Router Address Mapping Network Address Translation NATVirtual Server Special Applications Firewall Access ControlAdvanced Setup MAC Filtering Table URL Blocking Schedule Rule Intrusion Detection Discard Ping from WAN Default Disabled SPI and Anti-DoS firewall protection Default EnabledRIP Defect Default Enabled If an RIP request packet is When hackers attempt to enter your network, we can alert DoS Criteria and Port Scan Criteria Parameter Defaults DescriptionDMZ Ddns Dynamic DNS Settings UPnP Universal Plug and Play Setting Tools Tools Configuration ToolsTools Firmware Upgrade Tools Reset Section Description StatusVerify your connection to the Router TroubleshootingHave another IP Address displayed Am getting an IP Address that starts with10/100 LED does not light after a connection is made Indicator Panel Advanced FeaturesDimensions WeightPower Consumption Input PowerTemperature SafetyPage For Technical SUPPORT, Call