SMC Networks SMCHT-ETH manual Hardware Setup

Page 9

This screen shows that the installation was completed successfully. Click on ‘Finish’ to exit the wizard. Now its time to setup your hardware connections please refer to the next diagrams.

Hardware Setup

1.Plug your network cable into the computer’s RJ-45 network adapter port.

2.Plug the other end of your network cable into the RJ-45 port located at the back of the HomePlug Turbo Ethernet Adapter.

3.Plug your power connector of your power cable into the power connector at the back of the HomePlug Turbo Ethernet Adapter.

8

Image 9

Contents Page Trademarks CopyrightTable of Content Package Contents Features and BenefitsIntroduction System RequirementsBack Panel FrontInstallation Running the InstallShield WizardOverview Page Page Hardware Setup See below for example Diagnose Powerline network Diagnose a Local HomePlug Device ConfigurationPart 2 Diagnose a Network HomePlug device Setting Up Security on a Local HomePlug device Setting Up Security on a Network HomePlug device Frequently Asked Questions Appendix a TroubleshootingAppendix B IP Addressing What is an IP Address?Dynamic IP Addressing Static IP AddressingAppendix C Glossary Password Powerline NetworkingRJ-45 RouterAppendix D Product Specification FCC Statement Appendix E CompliancesTesla Irvine, CA Phone 949