SMC Networks Cable/DSL Router specifications Configuring the Barricade, Startup and Log

Page 15

Chapter 4 Configuring the Barricade

The Barricade provides a Web-based configuration scheme, which is configurable by Netscape Communicator or Internet Explorer. This approach can be adopted on any MS Windows, Macintosh or UNIX based platform.

4.1 Startup and Log in

Activate your browser, and disable the proxy or add the IP address of the Barricade into the exceptions. Then type the Barricade’s IP address in the Location (for Netscape) or Address (for Explorer) field and press ENTER. For example: http://192.168.123.254.

After the connection is established, you will see the web user interface. There are two appearances of the web user interface: for general users and for system administrator. To log in as an administrator, enter the system password (the factory setting is ”admin”) in the System Password field and click the Log in button. If the password is correct, the web appearance will be changed into administrator configure mode. As listed in its main menu, there are several options for system administration.

-14-

Image 15

Contents User Guide Trademarks FCC Interference StatementCE Declaration of Conformity Table of Contents Page Functions and Features Packing List LED indicators LEDs Function Color Status Description Panel LayoutFront Panel Rear Panel Ports Function Specification Installation RequirementsProcedure for Hardware Installation Power on Connecting the Barricade with other hubsSetting your computer network settings properly Network Settings and Software InstallationRequest timed out Install the Software into Your ComputersPage Page Startup and Log Configuring the BarricadeStatus Toolbox Primary Setup Dial -up Network Static IP AddressDynamic IP Address PPP over EthernetDhcp Server Dhcp Server Choose Disable or EnableVirtual Server Special AP Access Control Miscellaneous Items Print Server Configuring on Windows 95/98 PlatformsPage Configuring on Windows NT Platforms Configuring on Unix based Platforms Configuring on Windows 2000 PlatformsAppendix a Console Mode Installing TCP/IP protocol into your PC Appendix B TCP/IP Configuration for Windows 95/98Setting TCP/IP protocol to work with the Barricade Page Page Do not input any values in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page Page That’s it. You are now ready to start using your Barricade @Home Appendix C Installation Guide For Specific ISPMediaOne