SMC Networks Cable/DSL Router specifications Configuring on Windows NT Platforms

Page 27

3.Choose the “PRTmate: (All-in-1)” from the list attached under the Print To item. Be sure that the Printer Driver item is configured to the correct driver of your server printer.

4.Click the Port Settings button:

Type in the IP address of the Barricade and then click the OK button.

5. Make sure that all the settings mentioned above are correct, then click the OK button.

5.2 Configuring on Windows NT Platforms

The configuration procedure for a Windows NT platform is similar to that of Windows 95/98 except the screen of printer Properties:

-26-

Image 27

Contents User Guide Trademarks FCC Interference StatementCE Declaration of Conformity Table of Contents Page Functions and Features Packing List LED indicators LEDs Function Color Status Description Panel LayoutFront Panel Rear Panel Ports Function Specification Installation RequirementsProcedure for Hardware Installation Power on Connecting the Barricade with other hubsSetting your computer network settings properly Network Settings and Software InstallationRequest timed out Install the Software into Your ComputersPage Page Startup and Log Configuring the BarricadeStatus Toolbox Primary Setup Dial -up Network Static IP AddressDynamic IP Address PPP over EthernetDhcp Server Dhcp Server Choose Disable or EnableVirtual Server Special AP Access Control Miscellaneous Items Print Server Configuring on Windows 95/98 PlatformsPage Configuring on Windows NT Platforms Configuring on Unix based Platforms Configuring on Windows 2000 PlatformsAppendix a Console Mode Installing TCP/IP protocol into your PC Appendix B TCP/IP Configuration for Windows 95/98Setting TCP/IP protocol to work with the Barricade Page Page Do not input any values in the Gateway tab Choose Disable DNS in the DNS Configuration tab Page Page That’s it. You are now ready to start using your Barricade @Home Appendix C Installation Guide For Specific ISPMediaOne