RENOIR® LIGHTING CONTROLS •
Commercial Grade Lighting Controls
Specifications Lighting Controls | 4.50 (114.3) |
Architectural |
|
0.75 (19.1)
|
|
|
|
|
|
4.50 (114.3) |
|
|
|
| |
2.57 (65.3) |
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
2.75 (69.9) | 1.05 | |
(26.6) | ||
| ||
|
4.50 (114.3)
Renoir Architectural Fin Width
Narrow: 2.75" (69.9 mm)
Wide: 4.50" (108.0 mm)
CAUTION ON RETROFITS: When retrofitting Mark 10™ Powerline dimming ballasts into fixtures that originally had Instant Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent damage to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton
Renoir Architectural Specification Preset Slide Dimmers
Renoir Incandescent 120V AC 60Hz Only U R
DESCRIPTION | CAT. NO. | RATING | COLOR* |
Renoir | 80800 | 800W | I, W, GY, B |
|
|
|
|
Renoir | 800W | I, W, GY, B | |
Renoir | 81000 | 1000W | I, W, A, GY, B |
|
|
|
|
Renoir | 1000W | I, W | |
Renoir | 1000W | I, W, A, GY, B | |
|
|
|
|
Renoir | 1000W | I, W | |
Renoir | 81500 | 1500W | I, W, A, GY, B |
|
|
|
|
Renoir | 1500W | I, W, A, GY, B | |
Renoir | 82000 | 2000W | I, W, A, GY, B |
|
|
|
|
Renoir | 2000W | I, W | |
Renoir | 2000W | I, W, A, GY | |
|
|
|
|
Renoir | 2000W | I, W |
Renoir Magnetic Low-Voltage 120V AC 60Hz Only U R
DESCRIPTION | CAT. NO. | RATING | COLOR* |
Renoir Single Pole (narrow fin) | 71111 | 1000VA (800W) | I, W, GY, B |
Renoir | 71113 | 1000VA (800W) | I, W, B |
|
|
|
|
Renoir Single Pole (wide fin) | 71511 | 1500VA (1200W) | I, W |
Renoir | 71513 | 1500VA (1200W) | I |
|
| ||
Renoir Fluorescent Dimming Ballasts 120V and 277V AC 60Hz Only U R |
| ||
DESCRIPTION | CAT. NO. | RATING | COLOR* |
Renoir Fluorescent Dimmer, |
| 1200VA (900W) 120V AC | White |
| Advance Mark 10™ Powerline |
| |
|
| fluorescent dimming ballast |
|
Renoir Fluorescent Dimmer, |
| 1200VA (900W) 277V AC | White |
| Advance Mark 10™ Powerline |
| |
|
| fluorescent dimming ballast |
|
Note: For complete information on installation, ganging and derating of High Wattage Dimmers, consult Leviton's Lighting Controls Product Selection Guide or the Dimmer Instruction Sheet provided with the device.
When ganging these units, no derating is necessary except on those units which have had both sets of
Maximum Load per Renoir Dimmer
Cat. No. | Single | More Than | |
|
|
| |
1200VA | 1100VA | 1050VA | |
|
|
|
|
1200VA | 1200VA | 1200VA | |
|
|
|
|
71111/3 | 1000VA (800W) | 800VA (800W) | 700VA (640W) |
|
|
|
|
71511/3 | 1500VA (1200W) | 1300VA (1200W) | 1100VA (1040W) |
|
|
|
|
80800 | 800W | 700W | 600W |
|
|
|
|
81000 | 1000W | 800W | 700W |
|
|
|
|
81500 | 1500W | 1300W | 1000W |
|
|
|
|
82000 | 2000W | 1800W | 1500W |
|
|
|
|
NOTE: For fin removal and switchbox requirements for ganging Leviton Renoir dimmers, refer to page C17.
Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to each phase. Consult Leviton Techline if problems persist.
C
Mark 10™ dimmer.
SPECIFICATIONS AND FEATURES
•ON/OFF rocker switch turns lights ON at last selected brightness level
•
•Available in
•
•
•Slim, compact housing easily fits in standard wall boxes
•Fins are easily removed for
•Large radio/TV interference filter
•Illuminated versions available
TESTING AND CODE COMPLIANCE
•UL Listed (File
•CSA Certified (File
•Backed by a Limited
*COLOR
Add suffix to catalog numbers as follows for color selection: Ivory
MATERIAL CHARACTERISTICS
Environmental: Flammability
Operating Temperature: 32°F to 130°F
Courtesy14 | To learn more about Leviton’s outstanding offering of devices visit our Website at: www.leviton.com |
of Steven Engineering, |