Sylvania D3208 dimensions Mural L/S Level Set Decora-Style Preset Digital Dimmer

MURAL® LIGHTING CONTROLS • 600–1000 WATTS • 120V AC 60Hz

Commercial Grade Lighting Controls

Mural L/S (Level Set) Decora-Style Preset Digital Dimmer

All Mural L/S dimmers provide single-pole (1 location) and 3-way (multi-location) control when used with Multi-Remote unit.

Mural L/S Preset Digital Dimmer 120V AC 60Hz Only U R

DESCRIPTION	CAT. NO.	RATING	COLOR*
Mural L/S Incandescent LED Locator and	MLI06-1L	600W	I, W, A
Brightness Display			(G, E, B with Kit)
Mural L/S Incandescent LED Locator and	MLI10-1L	1000W	I, W, A
Brightness Display			(G, E, B with Kit)
Mural L/S Magnetic Low-Voltage	MLM06-1L	600VA (450W)	I, W, A
LED locator and Brightness Display			(G, E, B with Kit)
Mural L/S Magnetic Low-Voltage	MLM10-1L	1000VA (800W)	I, W, A
LED locator and Brightness Display			(G, E, B with Kit)
Mural L/S Electronic Low-Voltage LED	MLE03-1LW	350VA (280W)	W
Locator and Brightness Display			(I, A, G, E, B with Kit)
Mural L/S Advance Mark 10™ Powerline	MLX06-1L	600VA	I, W, A
Fluorescent Dimming Ballast			(G, E, B with Kit)
LED Locator and Brightness Display
Mural L/S Quiet Fan Speed Control	MLF01-1L	1.5A	I, W, A
LED Locator and Brightness Display			(G, E, B with Kit)
Mural L/S Incandescent LED Locator	MRI06-1L	600W	I, W, A
(no brightness display)			(G, E with Kit)
Mural L/S Incandescent LED Locator	MRI10-1L	1000W	I, W, A
(no brightness display)			(G, E with Kit)
Mural L/S Magnetic Low-Voltage	MRM10-1L	1000VA (800W)	I, W, A
LED Locator (no brightness display)			(G, E with Kit)
Multi-Remote Unit for	MS00R-10	No load rating	I, W, A
Multi-Location Dimming			(G, E, B with Kit)
(no LED locator or display)
Multi-Remote Unit for Electronic Low-Voltage	MSE0R-10W	No load rating	W
Multi-Location Dimming			(I, A, G, E, B with Kit)
(no LED locator or display)
Color Change Kits for Mural L/S	DLKDD-1L	—	I, W, A, G, E, B
(ML versions)
Color Change Kits for Multi-Remote Units	DRK0R-00	—	I, W, A, G, E, B
(no LED locator or display)
Color Change Kit for Mural L/S (MR versions)	MRK0D-0L	—	I, W, A, G, E

See Page C8 for more information on Leviton Power Extenders

Note: Sharing a neutral wire may cause flickering. Connect all dimmers to the same phase or run a separate neutral to each phase. Consult Leviton Techline if problems persist.

Digital Lighting and Fan Speed Controls are polarity sensitive devices. Always follow the wiring instructions included with each device. They can be used in conventional 3-way and 4-way wiring circuits only when the Control is properly con- nected to the load as indicated by the device’s wiring instructions.

4.13 (104.9) 3.28 (83.3) 2.67 (67.9)

2.38 (60.5)	1.38
	(35.1)

MLI06-1LW

4.13 (104.9) 3.28 (83.3) 2.67 (67.9)

2.38 (60.5)	1.38
	(35.1)

MRI06-1LW

Lighting Controls

CAUTION ON RETROFITS: When retrofitting Mark 10™ Powerline dimming ballasts into fixtures that originally had Instant Start ballasts, the sockets MUST be replaced with Rapid Start sockets to allow proper dimmer operation and prevent dam- age to the dimming ballast. Refer to the instructions provided with the ballast and the Leviton Mark 10™ dimmer.

SPECIFICATIONS AND FEATURES

•Smooth Decora rocker-action for Preset ON/OFF switch- ing with built-in arrow-shaped rocker for DIM/BRIGHT control

•Arrow rocker allows user to set brightness level when lights are off

•Second tap on top half of rocker for full bright. Gently double tap bottom half of rocker for fast OFF

•Easy to operate for people of all ages and abilities

•Provides single-pole (one-location) and multi-location full range dimming when used with Multi-Remote units

•Streamlined, popular Decora styling enhances any interior and adds a “family look” when ganged with any Decora device

•Digital circuitry provides SOFT-ON/FADE-OFF operation for an eye-pleasing effect and prolonged lamp life

•Square green LED display alongside rocker indicates selected brightness level on ML models

•Locator LED illuminates when lights are OFF

•Color change kits available in a wide range of choices, making it easy and economical to change decorating schemes

•Color change kits simplify inventory for distributors and contractors who can offer a complete range of colors without stocking a different device for each one

•Minimum brightness adjustment sets comfortable minimum light level

•Power failure recovery assures retention of lighting levels during long-term power interruptions.

•Built-in radio/TV interference filter

•ON/OFF AC air-gap switch completely disconnects power to unit for bulb changing or removal from service

TESTING AND CODE COMPLIANCE

•UL Listed (File #E-31373)

•CSA Certified (File #LR-3413)

•Backed by a Limited Five-Year warranty

*COLOR

To order colors, add suffix to basic catalog number. Colors in parentheses must be ordered as Color Change Kits. Color suffixes are: Ivory (-I), White (-W), Almond (-A), Gray (-G), Black (-E) and Brown (-B).

MATERIAL CHARACTERISTICS

Environmental: Flammability UL-94, V2 Rating

Operating Temperature: 32°F to 130°F

Use Leviton Power Extenders to extend the load capacity of box-mounted dim- mers. Leviton Power Extenders are available for incandescent, magnetic low-voltage, electronic low-voltage, Advance Mark 10™ Powerline fluores- cent dimming ballasts or equivalents, and 0–10 VDC dimmable fluorescent ballasts such as Advance Mark V7™, OSRAM Sylvania Quicktronic Helios or equivalent ballasts.

C

For answers to technical questions, call Leviton’s Techline at 1-800-824-3005 19

Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com