Seagate ST9160821SB manual Deferred spinup, Additional details, Conducted noise, Voltage tolerance

Page 15

2.9.2Deferred spinup

Momentus 5400.3 SATA drives provide a deferred spinup feature which storage subsystem controllers can use to sequence disc drive initialization. This is beneficial to systems which include multiple Serial ATA hard disc drives because it allows subsystem controllers to stagger the spinup of each drive to accommodate available power supply current. This feature does not impact time-to-ready in typical desktop systems.

To accommodate the deferred spinup of multiple disc drives in an enclosure, Momentus 5400.3 SATA disc drives will spin up only after power is applied to the drive and after successful PHY (Physical layer) initializa- tion. PHY initialization occurs after the PHY enters the DP7:DR_Ready state. This state is reached after a suc- cessful exchange of Out-Of-Band (OOB) signals with a functional host-side Serial ATA port. In desktop systems, SATA transceivers should initialize OOB as soon as power comes ready to guarantee the drive spins up quickly. Seagate disc drives will not spin up without an operational host-side Serial ATA transceiver.

Additional details

Upon system power up, PHY communication is initiated with a COMRESET signal, which is generated by the host-side transceiver. COMRESET is followed by a COMINIT signal generated by the disc drive transceiver. COMRESET and COMINIT are followed by an exchange of COMWAKE signals and Align primitives. The disc drive will spin up after the successful exchange of Align primitives cause the PHY to come ready.

For more details, refer to:

•Section 6.8 of the Serial ATA 1.0 High-Speed Serialized AT Attachment specification

•Section 6.2 of the Serial ATA II: Extensions to Serial ATA 1.0 specification

•SATA 1.0 design guides

Note. These specifications and guides are available on the Serial ATA web site (www.serialata.org).

2.9.3Conducted noise

Input noise ripple is measured at the host system power supply across an equivalent 15-ohm resistive load on the +5 volt line.

Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave injected noise at up to 10 MHz.

Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current.

2.9.4Voltage tolerance

Voltage tolerance (including noise):

5V ± 5%

Momentus 5400.3 SATA Blade Server Product Manual, Rev. E

9

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Momentus 5400.3 Sata Blade Server Page Contents Momentus 5400.3 Sata Blade Server Product Manual, Rev. E List of Figures Page Introduction About the Serial ATA interface Specification summary table Drive specificationsDrive acoustics, sound power bels Cylinders Read/write heads Sectors per track 16,383 Default logical geometryLBA mode Formatted capacityRecording and interface technology Physical characteristicsDrive specification Physical organizationPower specifications Seek timeTime to ready Power dissipation +5V input average 25 C Idle mode powerStandby mode DC powerVoltage tolerance Deferred spinupAdditional details Conducted noiseEnvironmental specifications Vibration ShockOperating shock Nonoperating shockRadio frequency environments AcousticsElectromagnetic immunity Drive level acousticsAgency certification Safety certificationMeasurement type Specification ReliabilityKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS Momentus 5400.3 Sata Blade Server Product Manual, Rev. E Handling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions-top, side and end viewMomentus 5400.3 Sata Blade Server Product Manual, Rev. E Segment Pin Function Definition Serial ATA connector pin definitionsSignal Serial ATA Sata interfacePin Function Definition Command name Command code in hex ATA-standard commands Supported ATA commandsATA-standard security commands Command name Command code in hexMomentus 5400.3 Sata Blade Server Product Manual, Rev. E Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordSet Features command values Set Features command3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Technical Support Seagate Technology support servicesInternet Presales SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE Sata Momentus 5400.3 Sata Blade Server Product Manual, Rev. E Page Seagate Technology LLC
Related manuals
Manual 2 pages 30.97 Kb

ST9402116SB, ST980815SB, ST9160821SB, ST9100828SB, ST9120822SB specifications

The Seagate ST980815SB, ST9120822SB, ST9402116SB, ST9160821SB, and ST9100828SB are a lineup of popular hard disk drives that cater to various data storage needs, especially in enterprise and server environments. Each model features a combination of cutting-edge technology, performance capabilities, and robust reliability, making them ideal choices for businesses and IT infrastructures.

The ST980815SB, with a capacity of 80GB, was designed to meet the requirements of entry-level servers, workstations, and embedded applications. It operates at a spindle speed of 7200 RPM, ensuring quick access to stored data. This model employs the use of perpendicular magnetic recording technology, which enhances data density and reliability, allowing for increased storage capacity in a compact form factor.

The ST9120822SB offers a larger storage capacity of 120GB, targeting small to mid-sized enterprise applications. Like its smaller counterpart, it operates at 7200 RPM, delivering high transfer rates and low latency, which are critical for data-intensive operations. It includes features such as Native Command Queuing (NCQ) that optimizes the order of read and write commands, enhancing overall performance during multi-tasking operations.

Next in line, the ST9402116SB provides an impressive 400GB of storage, catering to applications that require a substantial amount of capacity. This model also uses a 7200 RPM spindle speed and incorporates SATA interface technology, providing fast data transfer rates while ensuring seamless integration into existing systems. Its robust design makes it suitable for continuous operation in always-on environments.

The ST9160821SB is another impressive offering, with a maximum capacity of 160GB that serves businesses demanding higher storage solutions without sacrificing performance. It maintains 7200 RPM speeds and is built with advanced thermal and vibration protection features, ensuring stable performance under varying environmental conditions.

Lastly, the ST9100828SB rounds out this lineup with its unique balance of performance and capacity, offering 80GB of storage. It also benefits from Seagate's legacy of reliability and comes equipped with a SATA interface, ensuring compatibility with modern systems.

Overall, these Seagate models represent a comprehensive suite of solutions that meet the diverse needs of businesses, successfully combining capacity, speed, and reliability for optimal data storage solutions. Each of these devices leverages Seagate's cutting-edge technologies to deliver high performance and uptime, making them a reliable choice for both small businesses and enterprise-level applications.
Top Page Image Contents