Seagate ST3300831SCE manual Environmental protection, Australian C-Tick N176, FCC verification

Page 20

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZS3548 1995 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communi- cation Authority (ACA).

2.13.3FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually mar- keted to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate Technology LLC has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa- tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause interference to radio or television, which can be determined by turning the equipment on and off, you are encouraged to try one or more of the following corrective measures:

•Reorient the receiving antenna.

•Move the device to one side or the other of the radio or TV.

•Move the device farther away from the radio or TV.

•Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, you should consult your dealer or an experienced radio/television technician for additional sug- gestions. You may find helpful the following booklet prepared by the Federal Communications Commission: How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Super- intendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication num- ber 004-000-00345-4.

2.14Environmental protection

Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances.

2.14.1European Union Restriction of Hazardous Substances (RoHS)

The European Union Restriction of Hazardous Substances (RoHS) Directive restricts the presence of chemical substances, including Lead (Pb), in electronic products effective July 2006. Although amendments to the Euro-pean Union’s Restriction of Hazardous Substances (RoHS) Directive have not been finalized, to the best of our knowledge the disc drives documented in this publication will comply with the final RoHS Directive require-ments.

A number of parts and materials in Seagate products are procured from external suppliers. We rely on the rep-resentations of our suppliers regarding the presence of RoHS substances in these parts and materials. Our supplier contracts require compliance with our chemical substance restrictions, and our suppliers document their compliance with our requirements by providing material content declarations for all parts and materials for the disc drives documented in this publication. Current supplier declarations include disclosure of the inclusion of any RoHS-regulated substance in such parts or materials.

14

DB35 Serial ATA Product Manual, Rev. E

Page 19 Page 21
Image 20
Page 19 Page 21
Contents DB35 Serial ATA ST3400832SCE ST3300831SCE ST3250823SCE ST3200826SCEPage Contents DB35 Serial ATA Product Manual, Rev. E List of Figures Page Introduction DB35 Serial ATAAbout the Serial ATA interface Drive specifications Specification summary table30% per hour max Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,383Physical characteristics Recording and interface technologySeek time Typical seek times msec Read WritePower specifications Start/stop timesDC power requirements Typical current profilesPower-management modes Active modeIdle mode Sleep modeEnvironmental specifications Acoustics Electromagnetic immunity ReliabilityRadio frequency environments Performance Reference Test Description Level StandardSafety certification Agency certificationElectromagnetic compatibility Korean RRLEnvironmental protection Australian C-Tick N176FCC verification European Union Restriction of Hazardous Substances RoHSCorrosive environment DB35 Serial ATA Product Manual, Rev. E Configuring and mounting the drive Handling and static-discharge precautionsBreather filter hole precautions Configuring the driveSerial ATA cables and connectors Attaching Sata cablingMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionCommand name Command code in hex Supported ATA commandsSupported ATA commands F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command valuesCode in features register A.R.T. command 3 S.M.A.R.T. commandsA.R.T. commands DB35 Serial ATA Product Manual, Rev. E Seagate Technology support services InternetPresales Support Technical SupportData Recovery Services Call Center Toll-free Direct dial Warranty ServiceData Recovery Services Authorized Service Centers Index ITE RPM RRL Page Page Seagate Technology LLC

ST3250823SCE, ST3400832SCE, ST3300831SCE, ST3200826SCE specifications

The Seagate ST3250823SCE, ST3300831SCE, ST3200826SCE, and ST3400832SCE are notable hard disk drives that exemplify Seagate's commitment to providing reliable storage solutions for both consumer and enterprise applications. These drives leverage advanced technologies and offer various characteristics that cater to different storage needs.

The ST3250823SCE is a 250GB SATA hard disk drive designed for entry-level servers and desktop applications. It features a 7200 RPM spindle speed, ensuring swift data access and enhanced overall system performance. The drive's 8MB cache improves read and write speeds, allowing for more efficient data handling. Designed with durability in mind, the ST3250823SCE incorporates features like error correction codes and advanced power management, ensuring reliable operation over time.

Moving on to the ST3300831SCE, this drive offers a capacity of 300GB and is tailored for slightly more demanding applications. Like its predecessor, it boasts a 7200 RPM rotational speed, which helps maintain optimal performance for everyday computing tasks. The ST3300831SCE is also equipped with a SATA interface, making it compatible with a wide range of systems. Notably, its improved read/write speeds assist in reducing system bottlenecks, making it a suitable option for users who require extra storage without compromising speed.

The ST3200826SCE stands as a solid 200GB choice, particularly focusing on budget-conscious consumers. This model retains similar features to other drives in this series, including the 7200 RPM speed and SATA connection. Its reliability is enhanced through built-in technologies aimed at reducing data loss, thereby offering peace of mind for users who store critical information. The ST3200826SCE serves well for standard desktop usage and is a reliable option for archived data storage.

Finally, the ST3400832SCE, with its generous 400GB capacity, is positioned as a robust solution for users needing more substantial storage. Like its siblings, it operates at 7200 RPM, promoting fast data transfers. This model is particularly suitable for multimedia applications, such as video editing or gaming, where higher storage capacity coupled with quick access times is essential. The drive's design also incorporates features that support thermal management, ensuring optimal performance under load.

In summary, the Seagate ST3250823SCE, ST3300831SCE, ST3200826SCE, and ST3400832SCE collectively represent a diverse range of storage solutions that emphasize speed, reliability, and efficiency. Each model caters to different storage requirements, ensuring that users can find an appropriate solution tailored to their needs. These drives are characterized by their 7200 RPM speeds, SATA interfaces, and advanced technologies aimed at safeguarding data, making them a solid choice for both everyday users and professionals.
Top Page Image Contents