Seagate ST3300831SCE Recording and interface technology, Physical characteristics, Seek time

Page 12

2.4Recording and interface technology

Interface

Serial ATA (SATA)

 

 

Recording method

16/17 EPRML

 

 

Recording density BPI (bits/inch max)

763,000

 

 

Track density TPI (tracks/inch avg)

120,000

 

 

Areal density (Mbits/inch2 avg)

91,560

Spindle speed (RPM) (± 0.2%)

7,200

 

 

Internal data transfer rate (Mbytes/sec max)

95

 

 

Sustained transfer rate OD (Mbytes/sec max)

65.0

 

 

I/O data-transfer rate (Mbytes/sec max)

150 (SATA 1.0)

 

 

Interleave

1:1

 

 

Cache buffer

8 Mbytes

 

 

2.5Physical characteristics

Maximum height

 

(mm)

26.11

(inches)

1.028

 

 

Maximum width

 

(mm)

101.85

(inches)

4.010 +/- 0.010

 

 

Maximum length

 

(mm)

146.99

(inches)

5.787

 

 

Maximum weight

 

(grams)

635

(pounds)

1.39

 

 

2.6Seek time

Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:

•Track-to-track seek time is an average of all possible single-track seeks in both directions.

•Average seek time is a true statistical random average of at least 5,000 measurements of seeks between random tracks, less overhead.

Typical seek times (msec)

Read

Write

 

 

 

Track-to-track

0.8

1.0

 

 

 

Average

18

20

 

 

 

Average latency:

4.16

4.16

 

 

 

Note. These drives are designed to consistently meet the seek times represented in this manual. Physical seeks, regardless of mode (such as track-to-track and average), are expected to meet or exceed the noted values. However, due to the manner in which these drives are formatted, benchmark tests that include command overhead or measure logical seeks may produce results that vary from these specifications.

6

DB35 Serial ATA Product Manual, Rev. E

Page 11 Page 13
Image 12
Page 11 Page 13
Contents DB35 Serial ATA ST3400832SCE ST3300831SCE ST3250823SCE ST3200826SCEPage Contents DB35 Serial ATA Product Manual, Rev. E List of Figures Page Introduction DB35 Serial ATAAbout the Serial ATA interface Drive specifications Specification summary table30% per hour max Default logical geometry LBA modeFormatted capacity Cylinders Read/write heads Sectors per track 16,383Physical characteristics Recording and interface technologySeek time Typical seek times msec Read WritePower specifications Start/stop timesDC power requirements Typical current profilesPower-management modes Active modeIdle mode Sleep modeEnvironmental specifications Acoustics Electromagnetic immunity ReliabilityRadio frequency environments Performance Reference Test Description Level StandardSafety certification Agency certificationElectromagnetic compatibility Korean RRLEnvironmental protection Australian C-Tick N176FCC verification European Union Restriction of Hazardous Substances RoHSCorrosive environment DB35 Serial ATA Product Manual, Rev. E Configuring and mounting the drive Handling and static-discharge precautionsBreather filter hole precautions Configuring the driveSerial ATA cables and connectors Attaching Sata cablingMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Identify Device command Word Description ValueXx07H Description if bit is set to Bit Word Bit WordSet Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command DB35 Serial ATA Product Manual, Rev. E Seagate Technology support services InternetPresales Support Technical SupportWarranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index ITE RPM RRL Page Page Seagate Technology LLC

ST3250823SCE, ST3400832SCE, ST3300831SCE, ST3200826SCE specifications

The Seagate ST3250823SCE, ST3300831SCE, ST3200826SCE, and ST3400832SCE are notable hard disk drives that exemplify Seagate's commitment to providing reliable storage solutions for both consumer and enterprise applications. These drives leverage advanced technologies and offer various characteristics that cater to different storage needs.

The ST3250823SCE is a 250GB SATA hard disk drive designed for entry-level servers and desktop applications. It features a 7200 RPM spindle speed, ensuring swift data access and enhanced overall system performance. The drive's 8MB cache improves read and write speeds, allowing for more efficient data handling. Designed with durability in mind, the ST3250823SCE incorporates features like error correction codes and advanced power management, ensuring reliable operation over time.

Moving on to the ST3300831SCE, this drive offers a capacity of 300GB and is tailored for slightly more demanding applications. Like its predecessor, it boasts a 7200 RPM rotational speed, which helps maintain optimal performance for everyday computing tasks. The ST3300831SCE is also equipped with a SATA interface, making it compatible with a wide range of systems. Notably, its improved read/write speeds assist in reducing system bottlenecks, making it a suitable option for users who require extra storage without compromising speed.

The ST3200826SCE stands as a solid 200GB choice, particularly focusing on budget-conscious consumers. This model retains similar features to other drives in this series, including the 7200 RPM speed and SATA connection. Its reliability is enhanced through built-in technologies aimed at reducing data loss, thereby offering peace of mind for users who store critical information. The ST3200826SCE serves well for standard desktop usage and is a reliable option for archived data storage.

Finally, the ST3400832SCE, with its generous 400GB capacity, is positioned as a robust solution for users needing more substantial storage. Like its siblings, it operates at 7200 RPM, promoting fast data transfers. This model is particularly suitable for multimedia applications, such as video editing or gaming, where higher storage capacity coupled with quick access times is essential. The drive's design also incorporates features that support thermal management, ensuring optimal performance under load.

In summary, the Seagate ST3250823SCE, ST3300831SCE, ST3200826SCE, and ST3400832SCE collectively represent a diverse range of storage solutions that emphasize speed, reliability, and efficiency. Each model caters to different storage requirements, ensuring that users can find an appropriate solution tailored to their needs. These drives are characterized by their 7200 RPM speeds, SATA interfaces, and advanced technologies aimed at safeguarding data, making them a solid choice for both everyday users and professionals.
Top Page Image Contents