Seagate ST32000641AS manual Warranty, Agency certification Safety certification, FCC verification

Page 20

Drive Specifications

www.seagate.com

2.10 Warranty

To determine the warranty for a specific drive, use a web browser to access the following web page: support.seagate.com/customer/warranty_validation.jsp

From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial number, model number (or part number) and country of purchase. The system will display the warranty information for your drive.

2.11 Agency certification

2.11.1 Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked as to the certify agency.

2.11.2 Electromagnetic Compatibility (EMC)

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Electromagnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined by EN55022, Class B and the immunity levels are defined by EN55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the directives when used in the test systems, we cannot guarantee that all systems will comply with the directives. The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should confirm EMC compliance and provide CE marking for their products.

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized lab.

•Family name: Barracuda

•Certificate number:In process

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication Authority (ACA).

2.11.3 FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as an external device). As such, each drive is considered to be a subassembly even when it is individually marketed to the customer. As a subassembly, no Federal Communications Commission verification or certification of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure, disk drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and television reception.

20

Barracuda XT SATA Product Manual, Rev. D

Page 19 Page 21
Image 20
Page 19 Page 21
Contents BarracudaXT 100586689 Rev. D SeptemberRevision History Revision Date Description of changesContents Barracuda XT Sata Product Manual, Rev. D Figures Barracuda XT Sata Product Manual, Rev. D Seagate Technology Support Services Barracuda XT Sata Product Manual, Rev. D Introduction About the Serial ATA interfaceDrive Specifications Formatted capacity LBA modeDefault logical geometry Physical characteristics Power specificationsRecording and interface technology Start/stop timesRead/write power and current Operating power and currentIdle mode power Standby modeTypical 5V startup and operation current profiles 3000GB Typical 12V startup and operation current profiles 3000GBTypical 5V startup and current profiles 2000GB Typical 12V startup and current profiles 2000GBVoltage tolerance Power management modesConducted noise Environmental specifications Ambient temperature Temperature gradientHumidity AltitudeAcoustics ShockVibration Test Description Performance level Reference Standard Test for Prominent Discrete Tones PDTsElectromagnetic immunity Warranty Agency certification Safety certificationElectromagnetic Compatibility EMC FCC verificationCorrosive environment Environmental protectionChina Restriction of Hazardous Substances RoHS Directive Drive Specifications Serial ATA cables and connectors Handling and static-discharge precautionsConfiguring the drive Drive mounting Attaching Sata cablingMounting dimensions 3000GB model Mounting dimensions 2000GB model Ground 2nd mate 3V powerSegment Pin Function Definition 3V power, pre-charge, 2nd mate 12V power, pre-charge, 2nd mate12V power P14Supported ATA commands Command name Command code in hexCommand name Identify Device command Word Description ValueOr Write Multiple command Number of current logical headsNumber of current logical sectors per logical track 57-58 Current capacity in sectorsFffeh BE01H00DEH Bit Word AAH Set Features commandEnable read look-ahead read cache feature default 3 S.M.A.R.T. commands Code in features register A.R.T. commandMaster/slave 9 mounting Barracuda XT Sata Product Manual, Rev. DBarracuda XT Sata Product Manual, Rev. D Barracuda XT Sata Product Manual, Rev. D Barracuda XT Sata Product Manual, Rev. D Page Seagate Technology LLC ASIA/PACIFIC
Related manuals
Manual 42 pages 9.16 Kb
Top Page Image Contents