Seagate 18FC manual Dimensions Abbildung 3 Laufwerkabmessungen

Barracuda 18FC Installation Guide, Rev. A 21

A

[1]

F

D E

M

C

L

Notes:

B

H

1.875±.005 1.875±.005

[1]Mounting holes three on each side, 6-32 UNC. Max screw length into side of drive is 0.15 in. (3.81 mm).

[2] Mounting holes four on bottom,

6-32 UNC. Max screw length into bottom of drive is 0.15 in. (3.81 mm).

J[3] Keep-out zone for any components on backplane.

[4] Connector is centered on module and flush with end of base.

				K
				[2]
				N
Motherboard Ref.				.136
P	[4]	(.809)
			Pin 1
[3] R	Common centerline			Low
	in the horizontal			Profile
	(X axis) direction			Half
	of the drive			Height

	Inches			Millimeters
A	5.75	±	0.025	146.05	± .64
B	4.00	±	0.015	101.6	± .381
C	1.026	max		26.060 max
D	.620	ref		15.748	ref
E	4.000	±	0.010	101.600	± .25
F	.250	+	0.011	6.350	+ .28
		–	0.005		– .12
H	3.750	±	0.010	95.25	± .25
J	2.380	±	0.010	60.45	± .25
K	1.750	±	0.010	44.450	± .50
L	0.181	+	0.013	4.590	+ .33
		–	0.007		– .18
M	1.622	+	0.027	41.20	+ .69
		–	0.021		– .53
N	1.620	±	0.025	41.150	± .64
P	.1215	max		3.080 max
R	.1215	max		3.080 max

Figure 3: Dimensions

Abbildung 3: Laufwerkabmessungen