Seagate ST2000NM0051 Humidity Relative humidity, Altitude, Shock, Operating shock, 2TB models

Page 23

2.9.2Humidity

2.9.2.1Relative humidity

Operating:

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating:

5% to 95% noncondensing (30% per hour max)

 

 

2.9.3Altitude

Operating:

–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

 

 

Nonoperating:

–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

 

 

2.9.4Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.4.1Operating shock

These drives comply with the performance levels specified in this document when subjected to a maximum operating shock of 70 Gs (read) and 40 Gs (write) based on half-sine shock pulses of 2ms. Shocks should not be repeated more than two times per second.

2.9.4.2Nonoperating shock

1TB and 500GB models

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse of 2ms duration.

2TB models

The nonoperating shock level that the drive can experience without incurring physical damage or degradation in performance when subsequently put into operation is 300 Gs based on a nonrepetitive half-sine shock pulse of 2ms duration.

2.9.5Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.9.5.1Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below.

5–22 Hz

0.25 Gs

 

 

22–350 Hz

0.50 Gs

 

 

350–500 Hz

0.25 Gs

 

 

20 - 1500Hz

12.5 rads/s2 w/RVFF

*(RROV)

 

 

 

* Rotary Random Operating Vibration

2.9.5.2Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

10–500 Hz Linear Random

4.9 Grms ref

CONSTELLATION ES SERIAL ATA PRODUCT MANUAL, REV. F

18

Image 23
Contents Constellation ES Serial ATA Document Revision History Contents Serial ATA Sata interface Figures Seagate Technology Support Services Introduction About the Serial ATA Interface Specification Summary Tables Drive SpecificationsFormatted Capacity LBA modeSeek Time Default Logical GeometryPhysical Characteristics Recording and Interface Technology2TB models 1TB models 500GB models Power SpecificationsPower consumption START/STOP Times2TB Drive DC power requirements 1TB Drive DC power requirements 500GB Drive DC power requirements Typical current profiles 2TB model current profile 1TB model current profile Voltage tolerance 500GB model current profileStandby mode Power-management modesPower modes Heads Spindle Buffer Active modeA.R.T. Read Data Reports Extended Power Conditions PowerChoiceTMPower Condition Name Power Condition ID Description PowerChoice is invoked using one of two methodsPower Condition Identifiers Power Condition Name Power Condition Name Manufacturer Default Timer ValuesPowerChoice Supported Extended Power Condition Identifiers Environmental Limits Temperature a. OperatingOperating shock Humidity Relative humidityAltitude ShockElectromagnetic Immunity AcousticsFluid Dynamic Bearing FDB motor acoustics Test for Prominent Discrete Tones PdtsElectromagnetic compatibility Safety certificationReliability Agency CertificationFCC verification Korean RRLAustralian C-Tick N176 Corrosive Environment Environmental ProtectionChina Restriction of Hazardous Substances RoHS Directive Storage Product WarrantyReference Documents ShippingSerial ATA Cables and Connectors Handling and STATIC-DISCHARGE PrecautionsConfiguring the Drive Drive Mounting Mounting dimensions-top, side and end viewLevel 2 security PurposeSeagate Enterprise SEDs Random Number Generator RNG Controlled AccessData Encryption Drive Locking Authenticated Firmware DownloadPower Requirements Supported CommandsRevertsp ATA Security Erase Unit Command on SED Sata DrivesHOT-PLUG Compatibility Serial ATA Device Plug Connector PIN DefinitionsSerial ATA connector pin definitions Command name Command code in hex Supported ATA CommandsCA H Word Description Value Identify Device commandXx 3F H Description if bit is set to Set Features command values Set Features commandM.A.R.T. commands 3 S.M.A.R.T. commandsIndex Psid RNG Index Seagate Technology LLC