Word | Description | Value |
|
66 | Recommended multiword DMA transfer cycle time per word | 0078H |
|
| (120 ns) |
|
|
67 | Minimum PIO cycle time without IORDY flow control (240 ns) | 00F0H |
|
68 | Minimum PIO cycle time with IORDY flow control (120 ns) | 0078H |
|
0000H |
| ||
75 | Queue depth | 001FH |
|
76 | Serial ATA capabilities | xxxxH |
|
77 | Reserved for future Serial ATA definition | xxxxH |
|
78 | Serial ATA features supported | xxxxH |
|
79 | Serial ATA features enabled | xxxxH |
|
80 | Major version number | 003EH |
|
81 | Minor version number | 0028H |
|
82 | Command sets supported | 364BH |
|
83 | Command sets supported | 7C03H |
|
84 | Command sets support extension | 4003H See Word | |
| (see note following this table) | (4003H = 0100000000000011 | |
|
| binary) |
|
85 | Command sets enabled | 30xxH |
|
86 | Command sets enabled | 0001H |
|
87 | Command sets enable extension | 4000H |
|
88 | Ultra DMA support and current mode (see note following this table) | xx3FH |
|
89 | Security erase time | 0000H |
|
90 | Enhanced security erase time | 0000H |
|
92 | Master password revision code | FFFEH |
|
93 | Hardware reset value | xxxxH |
|
0000H |
| ||
Total number of | ST2000NM0011 = 3,907,029,168 | ||
| 2.2 for related information). These words are required for drives that | ST2000NM0031 = 3,907,029,168 | |
| support the | ST2000NM0051 = 3,907,029,168 | |
| 0000FFFFFFFFFFFFh. | ST1000NM0011 = 1,953,525,168 | |
|
| ST1000NM0031 = 1,953,525,168 | |
|
| ST1000NM0051 = 1,953,525,168 | |
|
| ST500NM0011 = | 976,773,168 |
|
| ST500NM0031 = | 976,773,168 |
|
| ST500NM0051 = | 976,773,168 |
0000H |
| ||
The mandatory value of the world wide name (WWN) for the drive. | Each drive will have a unique | ||
| NOTE: This field is valid if word 84, bit 8 is set to 1 indicating | value. |
|
| WWN support. |
|
|
0000H |
| ||
128 | Security status | 0001H |
|
xxxxH |
| ||
0000H |
| ||
255 | Integrity word | xxA5H |
|
Note. See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.
CONSTELLATION ES SERIAL ATA PRODUCT MANUAL, REV. F | 34 |