Seagate ST3500321CS, ST3320310CS, ST3160310CS, ST3320410CS, ST3500422CS Environmental specifications

Page 19

2.9Environmental specifications

2.9.1Drive case temperature

Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet (3,048 meters).

Drive case temperature should be measured at the location indicated in Figure 4 on page 21.

Operating (Drive case temperature)

0° to 75°C (32° to 167°F)

 

 

Nonoperating (Ambient *)

–40° to 70°C (–40° to 158°F)

 

 

* Ambient temperature is defined as the temperature of the environment immediately surrounding the drive.

2.9.2Temperature gradient

Operating:

20°C per hour (68°F per hour max), without condensation

 

 

Nonoperating:

30°C per hour (86°F per hour max)

 

 

2.9.3Humidity

2.9.3.1Relative humidity

Operating:

5% to 90% noncondensing (30% per hour max)

 

 

Nonoperating:

5% to 95% noncondensing (30% per hour max)

 

 

2.9.3.2Wet bulb temperature

Operating:

37.7°C

(99.9°F max)

 

 

 

Nonoperating:

40.0°C

(104°F max)

 

 

 

2.9.4Altitude

Operating:

–60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

 

 

Nonoperating:

–60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

 

 

Pipeline HD Series SATA Product Manual, Rev. C

13

Page 18 Page 20
Image 19
Page 18 Page 20
Contents ST3500321CS ST3500422CS ST3320310CS ST3320410CS ST3160310CS Pipeline HD Series SataRevision Date Sheets affected or comments Revision historyContents Pipeline HD Series Sata Product Manual, Rev. C List of Figures Page Introduction About the Serial ATA interface Specification summary tables Drive specificationsDrive specification ST3500422CS ST3500321CS Drive specifications summary for 500 Gbyte modelsPipeline HD Series Sata Product Manual, Rev. C Drive specification ST3320410CS ST3320310CS ST3160310CS Drive specifications summary for 320 and 160 Gbyte modelsPipeline HD Series Sata Product Manual, Rev. C Recording and interface technology Default logical geometryLBA mode Formatted capacitySeek time Physical characteristicsStart/stop times Power specifications Conducted noise Typical current profilesVoltage tolerance Sleep mode Power-management modesActive mode Idle modeEnvironmental specifications 160 GB models ShockOperating shock Nonoperating shock GB modelsTest for Prominent Discrete Tones PDTs Drive A-weighted Sound Power Levels SWL, BAAcoustics emissions Electromagnetic immunityAnnualized Failure Rate AFR Safety certificationReliability Agency certificationAustralian C-Tick N176 Korean RRLFCC verification Corrosive environment Environmental protectionHandling and static-discharge precautions Configuring and mounting the driveSerial ATA cables and connectors Configuring the driveDrive mounting Mounting dimensions for 500 GB modelsMounting dimensions for 320 and 160 GB models Hot-Plug compatibility Serial ATA Sata interfacePin Function Definition Serial ATA device plug connector pin definitionsSerial ATA connector pin definitions SignalSupported ATA commands Supported ATA commandsCommand name Command code in hex F4H Word Description Value Identify Device commandXx07H Bit Word Description if bit is set to Bit WordWord Set Features command values Set Features commandA.R.T. commands 3 S.M.A.R.T. commandsCode in features register A.R.T. command Technical Support Seagate Technology support servicesInternet Presales SupportData Recovery Services Authorized Service Centers Warranty ServiceData Recovery Services Call Center Toll-free Direct dial Index ITE Page Pipeline HD Series Sata Product Manual, Rev. C Page Seagate Technology LLC

ST3320310CS, ST3500321CS, ST3320410CS, ST3160310CS, ST3500422CS specifications

Seagate has long been recognized as a leader in data storage solutions, and their range of hard drives continues to reflect innovation and reliability. Among the notable SATA drives are the Seagate ST3500422CS, ST3160310CS, ST3320410CS, ST3500321CS, and ST3320310CS models, all designed for various consumer and enterprise applications.

The ST3500422CS operates at a capacity of 500GB, combining high performance with energy efficiency. With a spindle speed of 7200 RPM and a 32MB cache, it ensures rapid data access and transfer rates, making it suitable for multimedia storage and gaming applications. This drive incorporates Seagate’s Instant Secure Erase technology, which allows users to securely wipe their data quickly, ensuring privacy and data protection.

Next, the ST3160310CS model offers a storage capacity of 160GB, ideal for smaller applications requiring faster access times. Also spinning at 7200 RPM, it features a similar 8MB cache, ensuring good performance for everyday computing needs. Its compact design makes it suitable for both desktop systems and where space is at a premium.

The ST3320410CS is designed for larger capacity requirements, providing up to 320GB of storage space. This drive features enhanced data integrity with a 16MB cache and a consistent performance level that makes it suitable for both personal computing and lightweight server applications. Its Balancing Act technology optimizes the drive's performance across multiple workloads, extending its lifespan.

The ST3500321CS provides users with 500GB of storage, similar to the ST3500422CS but with a focus on data reliability. Featuring advanced error correction technologies, it diminishes the chance of data loss, making it a great choice for critical applications requiring consistent reliability.

Finally, the ST3320310CS model holds 320GB of storage capacity and shares many characteristics with its counterparts, such as the 7200 RPM speed and strong error correction mechanisms. The drive also utilizes Seagate's Thermal Fly-Height Control technology, which further enhances reliability by adjusting the read/write heads according to the drive's operational temperature.

Overall, these drives exemplify Seagate's commitment to performance, efficiency, and data protection across their various storage solutions. With a range of capacities and features, they cater to diverse user needs while ensuring reliability and speed in data access.
Top Page Image Contents