Seagate ST9500423ASG, ST9750422AS, ST9750424AS Environmental protection, Corrosive environment

Page 24

3.15Environmental protection

Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances.

3.15.1European Union Restriction of Hazardous Substances (RoHS)

Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. A new law, the European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical substances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic products, effective July 2006. This drive is manufactured with components and materials that comply with the RoHS Directive.

3.15.2 China Restriction of Hazardous Substances (RoHS) Directive

This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table contains information mandated by China's "Marking Requirements for Control of Pollution Caused by Electronic Information Products" Standard.

"O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower than the threshold defined by the China RoHS MCV Standard.

“O”表示该部件（于同类物品程度上）所含的危险和有毒物质低于中国RoHS MCV标准所定义的门槛值。

"X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over the threshold defined by the China RoHS MCV Standard.

“X”表示该部件（于同类物品程度上）所含的危险和有毒物质超出中国RoHS MCV标准所定义的门槛值。

3.16Corrosive environment

Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845. However, this accelerated testing cannot duplicate every potential application environment.

Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corro- sive chemicals as electronic drive component reliability can be affected by the installation environment. The sil- ver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulca- nized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.

18

Momentus Product Manual, Rev. C

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Momentus Standard models Free-fall sensor modelsRevision history Revision Date Sheets affected or commentsContents Momentus Product Manual, Rev. C List of Figures Page Seagate Technology support services Seagate Online Support and ServicesIntroduction Standard models Free Fall Protection modelsAbout the Serial ATA interface Drive specifications Specification summary tableDrive specifications for 750, 640 and 500 GB models Altitude, nonoperating Default logical geometry LBA modeFormatted capacity Physical organizationPhysical characteristics Drive specificationRecording and interface technology Seek time Start/stop timesTypical seek times Typical seek times ms ReadPower specifications Typical current profile Conducted noise Voltage tolerancePower-management modes Power management modesActive mode Idle modeEnvironmental specifications Shock Operating shockNonoperating shock VibrationDrive A-weighted Sound Power Levels SWL, BA AcousticsElectromagnetic immunity Test for Prominent Discrete Tones PDTsFree Fall Protection feature Safety certificationReliability Agency certificationKorean RRL Australian C-Tick N176FCC verification Environmental protection Corrosive environmentEuropean Union Restriction of Hazardous Substances RoHS China Restriction of Hazardous Substances RoHS DirectiveConfiguring and mounting the drive Handling and static-discharge precautionsConfiguring the drive Serial ATA cables and connectorsMounting dimensions-top, side and end view Drive mountingSerial ATA Sata interface Hot-Plug compatibilitySerial ATA device plug connector pin definitions Serial ATA connector pin definitionsSignal Pin Function DefinitionSupported ATA commands Command name Command code in hex ATA-standard commandsCommand name Command code in hex ATA-standard security commandsIdentify Device command Word Description ValueXxxxH Fffeh Description if bit is set to Bit Set Features command Set Features command values3 S.M.A.R.T. commands A.R.T. commandsCode in features register A.R.T. command Momentus Product Manual, Rev. C Index ITE TPI Momentus Product Manual, Rev. C Page Seagate Technology LLC
Related manuals
Manual 46 pages 46.03 Kb

ST9500428AS, ST9640422AS, ST9750423ASG, ST9750420AS, ST9750420ASG specifications

The Seagate ST9750422AS, ST9750423AS, ST9500423ASG, ST9640423ASG, and ST9500423AS are part of Seagate's popular lineup of SATA hard drives designed for consumer and enterprise applications. These drives are recognized for their reliability, performance, and advanced technologies, making them suitable for a variety of storage needs.

The ST9750422AS and ST9750423AS models are 7200 RPM drives with a storage capacity of 750 GB, while the ST9500423ASG and ST9640423ASG offer different capacities and characteristics tailored for specific uses. The ST9500423ASG typically features a 500 GB capacity, while the ST9640423ASG is often found with 640 GB of storage space. These drives support the Serial ATA interface, ensuring high-speed data transfer rates and compatibility with a broad range of host systems.

All drives in this series feature a robust 32 MB cache that enhances performance by allowing faster access to frequently used data. This cache is critical, especially for read/write operations that require rapid data retrieval, making these models well-suited for tasks ranging from simple home computing to more intensive applications such as gaming and multimedia editing.

The ST9750422AS and ST9750423AS models are built with technologies such as Advanced Format, which improves storage capacity and enhances error correction. Additionally, these drives employ Seagate's PowerBalance and PowerFin technologies, enabling efficient power management without compromising performance.

Reliability is a core characteristic of the Seagate ST9XXX series, featuring a mean time between failures (MTBF) of over a million hours, which translates to increased system uptime and reduced potential for data loss. The drives also include features such as Native Command Queuing (NCQ), which optimizes the processing of multiple read/write commands, further boosting performance during heavy workloads.

In conclusion, the Seagate ST9750422AS, ST9750423AS, ST9500423ASG, ST9640423ASG, and ST9500423AS hard drives represent a blend of speed, reliability, and advanced technology, making them an excellent choice for users looking for dependable storage solutions. Whether for a home PC or an enterprise server, these drives continue to deliver outstanding performance and value in a competitive market.
Top Page Image Contents