2.8.6.1Operating vibration
The maximum random vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below. This specification does not cover connection issues that may result from testing at this level.
11.08 Grms
2.8.6.2Nonoperating vibration
The maximum random nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.
11.08 Grms
2.9ELECTROMAGNETIC IMMUNITY
When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table:
Table 5 Radio frequency environments
TEST | DESCRIPTION | PERFORMANCE | REFERENCE | |
LEVEL | STANDARD | |||
|
| |||
|
|
|
| |
Electrostatic discharge | Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV | B | EN | |
|
|
|
| |
Radiated RF immunity | 80 to 1000 MHz, 3 V/m, | A | EN | |
| 80% AM with 1 kHz sine |
| ENV 50204: 95 | |
| 900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz |
|
| |
|
|
|
| |
Electrical fast transient | ± 1 kV on AC mains, ± 0.5 kV on external I/O | B | EN | |
|
|
|
| |
Surge immunity | ± 1 kV differential, ± 2 kV common, AC mains | B | EN | |
|
|
|
| |
Conducted RF immunity | 150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine | A | EN | |
|
|
|
| |
Voltage dips, interrupts | 0% open, 5 seconds | C | EN | |
| 0% short, 5 seconds | C |
| |
| 40%, 0.10 seconds | C |
| |
| 70%, 0.01 seconds | B |
| |
|
|
|
|
SEAGATE 600 SSD PRODUCT MANUAL, REV. A | 12 |