Seagate ST240HM001, ST120HM001, ST120HM000, ST240HM000, ST480HM000 manual Document Revision History

Page 2

Document Revision History

Revision

Date

Description of changes

 

 

 

Rev. A

04/11/2013

Initial release.

 

 

 

© 2013 Seagate Technology LLC. All rights reserved.

Publication number: 100722309, Rev. A April 2013

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Seagate 600 SSD and SeaTools are either trademarks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United States and/or other countries. The FIPS logo is a certification mark of NIST, which does not imply product endorsement by NIST, the U.S., or Canadian governments.All other trademarks or registered trademarks are the property of their respective owners.

No part of this publication may be reproduced in any form without written permission of Seagate Technology LLC. Call 877-PUB-TEK1 (877-782-8351) to request permission.

When referring to drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or TB, equals one trillion bytes. Your computer’s operating system may use a different standard of measurement and report a lower capacity. In addition, some of the listed capacity is used for formatting and other functions, and thus will not be available for data storage. Actual quantities will vary based on various factors, including file size, file format, features and application software. Actual data rates may vary depending on operating environment and other factors. The export or re-export of hardware or software containing encryption may be regulated by the U.S. Department of Commerce, Bureau of Industry and Security (for more information, visit www.bis.doc.gov), and controlled for import and use outside of the U.S. Seagate reserves the right to change, without notice, product offerings or specifications.

Image 2
Contents Seagate 600 SSD Document Revision History Contents Figures Seagate Technology Support Services Usage Based 7mm Model 2.5 Usage Based 5mm Model About the Serial ATA InterfaceDrive Specifications Specification Summary TablesFormatted Capacity LBA modeDefault Logical Geometry for ATA Based Systems Recording technology PERFORMANCE, Recording and Interface TechnologyInterface technology PerformancePhysical Characteristics Time to ReadyPower Specifications 240GB DC power requirements 120GB DC power requirements Typical current profiles Typical 5V Startup and Operation Current ProfileEnvironmental Specifications Electromagnetic Immunity Operating vibrationNonoperating vibration Radio frequency environmentsReliability specifications ReliabilityAgency Certification Corrosive Environment Environmental ProtectionChina Restriction of Hazardous Substances RoHS Directive Serial ATA Cables and Connectors Handling and STATIC-DISCHARGE PrecautionsConfiguring the Drive Mounting configuration dimensions 7mm models Drive MountingMounting configuration dimensions 5mm models Cooling Air flow5 Sata Connector Plug Pinout Serial ATA Sata InterfaceSummarizes the 1.8 drive Signal and Power Sata Plug 8 Sata Connector Plug PinoutSupported ATA Commands Supported ATA commandsCA H Identify Device command 3FFFHFffeh Bit Word Read zero after Trim is supported Bit Word Smart error logging is supported Set Features command Set Features command valuesSSD Percentage Endurance Remaining Indicator 3 S.M.A.R.T. commandsA.R.T. Command M.A.R.T. commandsIndex Index Index Seagate Technology LLC Americas
Related manuals
Manual 39 pages 38.93 Kb